User manual SAMSUNG AST18AJHD

[. . . ] USER'S MANUAL Indoor Unit AST18AJHD Outdoor Unit UST18AJHD Split-type Air Conditioner (Cooling) E DB98-24838A(1) Register your product at www. samsung. com/global/register Safety Precautions You should take the following safety precautions when using your air conditioner. · If you don't follow the safety precautions, you may get the risk of an electric shock, injury or death. ·The manufacturer or qualified service personnel must install this air conditioner. · Turn off the electric power before repairing, installing or cleaning. WARNING DURING OPERATION N Do not repair the air conditioner at your discretion. It is recommended to contact a service center directly. [. . . ] N The temperature is set automatically. Note You can change modes at any time. 3 Press the button to select the fan speed until the required setting is displayed. Low Medium High Result: N Each time you press the button, the indoor unit beeps. N The fan speed indicator increases and decreases continuously and turns round each time you press the button. Control Panel 4 To control the airflow direction, refer to pages 18 and 19. E-12 Selecting the Turbo Function You can select the Turbo Function if you want to cool your room in the fastest way. After the 30 - minute operation with the maximum setting, it returns to the previous setting. 1 If necessary, press the Result: (On/Off) button. N The operation indicator on the indoor unit lights up. N The air conditioner starts up in the mode you selected last. N The indoor unit beeps. 2 Press the Result: button. N The temperature and fan settings are adjusted automatically. N The fan speed indicator turns round with the maximum setting and speed. N The air conditioner cools the room as quickly as possible. N After 30 minutes, the air conditioner is reset automatically to the previous setting. N The indoor unit beeps. 2 Press the Result: button. N The indicator on the indoor unit lights up and the Auto Cleaning function is set. N When you turn the air conditioner off, it operates the Auto Cleaning function for 30 minutes. After 30 minutes, the air conditioner turns off. N If you press the button when the air conditioner is turned off, the air conditioner operates the Auto Cleaning Function for 30 minutes. Remote Control When the air conditioner is turned On Off Note Mode Auto, Cool, Dry Fan Operating time 30 minutes 15 minutes 30 minutes Control Panel The Auto Cleaning indicator is displayed only on the indoor unit. 3 Press the button again to stop the Auto cleaning function before the end of the 30-minute period. E-15 Selecting the Sound On / Off Function You can turn on or off the sound of the air conditioner with the remote control. 1 Press the button to turn off the sound. button, Sound On/Off function is Note Each time you press the selected repeatedly. On Off E-16 Selecting the Anions Function The air conditioner can generate anions with an ionizer in the indoor unit. Since it is an additional function, you can select it in any mode, even when the air conditioner is turned off. Note If you press the button when the air conditioner is off, the air conditioner turns on automatically and generates anions in the Fan mode with Low fan speed. 2 Press the button again to stop the Anions function. Result: The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the airflow direction, refer to pages 18 and 19. E-17 Adjusting the Airflow Direction Vertically You can adjust the airflow direction vertically. [. . . ] N Replace the remote control batteries if necessary. N Check if the correct operating mode has been selected (Auto, Cool). N Check if the air filter is dirty; refer to page 27 for cleaning instructions. N Check that there is no obstacle in front of the outdoor unit. [. . . ]