User manual SAMSUNG AV-R601

[. . . ] Digital Surround AV Receiver System HT-AS601 Instruction Manual ELECTRONICS (AV-R601) AH68-01751B Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN Precautions GB PREPARATION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note to CATV system installer : This reminder is provided to call the CATV system installer's attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). [. . . ] Default setting value is 00dB. 1 Press SETUP button. "SETUP MODE" appears on the display and enters into Setup Mode. 7 2 Press INPUT button ontimes. "LEVEL SETUP" appears the display. OPERATION 3 Press SURROUND button. will be selected in turn. Each time you press this button, F. L CEN F. R S. R S. B S. L S. W 4 Press SELECT( want. , ) button to set to the speaker level you You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB. Default setting value is 00dB To Exit Setup Mode Wait for about 5 seconds or press SPK LEVEL button on the remote control to select SPKLEVEL OFF. To Exit Setup Mode Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP MODE OFF" appears on the display and exits Setup Menu. Setting Speaker Level F. L (Front-Left) : -10 ~ +10dB CEN (Center) : -10 ~ +10dB F. R (Front-Right) : -10 ~ +10dB S. R (Surround-Right) : -10 ~ +10dB S. B (Surround Center): -10 ~ +10dB S. L (Surround-Left): -10 ~ +10dB S. W (Subwoofer): -10 ~ +10dB 25 26 Dolby Pro Logic llx Mode This mode provides 5. 1 channel sound from 2 channel sources GB REMOTE CONTROL 1 Presstime you press MODE button. CINEMA MATRIX GAME Each this button, MUSIC PROLOGIC will be selected in turn. MAIN UNIT 1 Press SURROUND button briefly to select "DPL llx" Mode. Each time you press this button, DPL ll x NEO:6 SFE STEREO will be selected in turn. OPERATION 2 Press SELECT( , ) button. ) button, MUSIC CINEMA MATRIX GAME PROLOGIC will be selected in turn. Each time you press SELECT ( ) button, PROLOGIC GAME MATRIX CINEMA MUSIC will be selected in turn. Each time you press SELECT ( To Exit Setup Mode Wait for about 5 seconds. To Exit Setup Mode Wait for about 5 seconds. Dolby Pro Logic ll x Mode MUSIC : Provides 5. 1 Channel Surround sound to digital, analog or existing stereo sources such as CD, TAPE, FM, TV and Stereo VCR. CINEMA : Adds realism to the movie soundtrack. MATRIX : You will hear 5. 1 Channel Surround sound. GAME : Enhances the excitement of the game's sound. PROLOGIC : You will experience a surround effect with just the front left and right speakers. You cannot use Dolby Pro Logic ll x Mode for multi channel signals such as Dolby Digital and DTS. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. Sound will not be output from rear center speaker if PCM audio signal is mono. 27 28 Dolby Pro Logic llx Effect This function works only in Dolby PRO LOGIC IIX MUSIC Mode. GB REMOTE CONTROL MODE button to select `MUSIC' Mode. 2 Presstime you press EFFECTC-WIDTH DIMENSION PANORAMA Each this button, DPL llx EFT OFF will be selected in turn. MAIN UNIT button. 1 Press SETUPappears on the display and enters into Setup Mode. "DPL x MODE"appears OPERATION Press 3 want. button to select Dolby Pro Logic IIx effect you C-WIDTH: You can set from 0 to 7. PANORAMA: You can Set it ON or OFF. SURROUND button. 3 Presstime you press this button, C-WIDTH DIMENSION PANORAMA Each will be selected in turn. 4 Press SELECT( effect you want. , ) button to select Dolby Pro Logic llx To Exit Setup Mode To Exit Setup Mode Wait for about 5 seconds or press Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP Effect button of remote control to select MODE OFF" appears on the display and exits Setup Mode. DLP ll x EFT OFF. Dolby Pro Logic llx Effect C-WIDTH : This sets the width of the center image. The higher the setting, the less sound comes from the center speaker. DIMENSION : Incrementally adjusts the sound field (DSP)from the front or rear. PANORAMA : This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. 29 30 NEO:6 Mode You can play back 2 channel sound over 6. 1 channels of when enjoying music or a movie. GB REMOTE CONTROL NEO:6 MODE button. 1 Presstime you press this button, MUSIC CINEMA will be selected in turn. Each MAIN UNIT SURROUND button briefly to select "NEO:6" Mode. [. . . ] Also, some operation may not be possible depending on your brand of TV. The remote control will work with Samsung TVs by default. 45 46 Operating your VCR (DVD) with Remote Control VCR Brand Code List Brand Code Number 043, 106 044, 045, 046 088, 089, 090 001, 002, 003, 004, 005, 033 091 019, 047, 092 048, 093 092, 094, 095 001, 033, 049, 091 011 050 050, 072, 096 051 001, 031, 032, 033, 044, 091 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 046, 051, 091 011 019, 047, 052, 092 025, 031, 032, 044, 046, 094, 095, 097, 098, 099 009, 048, 053, 054, 055, 100 044 001, 031, 032, 033, 056, 091 059, 060, 061 019 020, 021, 049, 054, 062, 100 051 001, 033, 049, 091 001, 033 025 047, 048, 052, 062, 091, 092 001, 033, 047, 052, 063, 064, 065, 092 047, 050, 052, 092 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 050 020, 025, 044, 048, 050, 053, 054, 055, 062, 100 072 001, 031, 032, 033, 049, 066, 067, 091 001, 019, 033, 047, 052, 092, 110 025, 050 GB Brand MEI MEMOREX MINOLTA MITSUBISHI/MGA MTC MULTITECH NEC OLYMPIC OPTIMUS ORION PANASONIC PENNEY PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND QUASAR RICO RCA/PROSCAN Code Number 001, 033 001, 025, 033, 054, 091, 100 020, 021, 062 068, 069, 070, 101, 102 072 044, 057, 069 019, 047, 052, 057, 092 049, 091 101 103 001, 004, 033, 049, 067, 091, 107 019, 020, 072 001, 020, 021, 033, 062 001, 033, 046, 049, 091, 094 001, 030, 033, 049, 050, 066, 091 025 049 011 001, 033, 049, 067, 091, 107, 108 036 001, 020, 021, 031, 032, 033, 049, 051, 062, 066, 070, 091, 104 001, 009, 025, 033, 101, 105 000, 006, 031, 032, 057, 058, 071, 072, 073, 074, 075, 076, 077, 078, 079, 080, 081 008, 009, 046, 048, 050, 054, 058, 093, 100 092 006, 051, 054, 057, 069, 070, 100, 101 020, 021, 025 043, 105, 106 096 043, 044, 054, 100, 106 096 034, 035, 036, 037, 038, 039, 040, 041, 042, 082, 083, 084, 085, 086 020 001, 033, 044, 049, 066, 091 044 009 Brand TASHIRO TATUNG TEAC TECHNICS TEKNIKA TOSHIBA TOTEVISION TAEKWANG UNITECH VECTOR RESEARCH VIDEO CONCEPTS VIDEOSONIC WARDS Code Number 050 047, 052, 092 044, 047, 052, 092 001, 033, 049, 091 001, 025, 033 006, 051 025, 072 087 072 019 019 072 001, 020, 031, 032, 033, 043, 050, 054, 072, 100, 105, 106, 109 019, 047, 048, 052, 092, 019, 047, 048, 052, 092 1 2 3 4 5 Press MODE button to make VCR indicator on the remote control flash. If you operate DVD, press Device Select button to make DVD ADMIRAL(M. WARDS) AWIA AKAI ANAM AOC AUDIO DYNAMIC BELL & HOWELL(M. WARDS) BROKSONIC CANON CAPEHART CITIZEN CRAIG CRITERION CURTIS MATHES DAEWOO indicator on the remote control flash. Press POWER( VCR (DVD). ) button to turn on the Point the remote control toward the VCR (DVD). While holding down POWER( ) button, enter the code corresponding to your brand of VCR (DVD). If the code matches the VCR (DVD)'s code, the VCR (DVD) will YAMAHA ZENITH DVD Brand Code List Brand DENON DOONOON DMTECH FISHER GE HARMAN/KARDON JVC KENWOOD LG MAGNAVOX MITSUBISHI ONKYO OPTIMUS PANASONIC PROSCAN PHILIPS PIONEER RCA SAMSUNG SANYO SONY THETA DIGITAL TOSHIBA YAMAHA ZENITH TAEGWANG PS2 X-BOX APEX MARANTZ DAYTRON DBX EMERSON FISHER FUNAI GENERAL ELECTRIC(GE) GO VIDEO HARMAN KARDON HITACHI HQ INSTANT REPLAY JCL JCP JC PENNY JVC KENWOOD LG(GOLDSTAR) Code Number 003, 032 019 017 002 006 012 010, 013 008 001 004 005, 016 004, 014 011 021 006 004, 023 007, 011, 022, 025 006 000, 027 002 015, 020 011 004, 018 009, 033 004, 024 026 028 029 030 031 be turned off. If there is more than one code listed for your VCR (DVD) in the REALISTIC 044, 048, 054, 091, SAMSUNG table, enter one at a time to determine which code works. If VCR (DVD) is turned on or off when you press the power button of the remote controller, the setting is completed. You can use VCR (DVD) POWER, VOLUME, PLAY, PAUSE, MISCELLANENOUS SANYO SANSUI SCOTT SEARS SHARP SINGER SIGNATURE 2000 (M. WARDS) SHINTOM SONY STOP, SKIP and Numeric button (0~9). LXI(SEARS) MAGIN MAGNAVOX MARANTZ STS SYLVANIA SYMPHONIC TANDY The remote control may not work on some brands of VCR (DVD)s. Also, some operations may not be possible depending on your brand of VCR (DVD). The remote control will work with Samsung VCRs (DVDs) by default. MARTA 47 48 Before Calling for Service Symptom Can't turn it on. It does not work when the button is pressed. GB Check Is the power code plugged into the outlet? Remedy Connect the power plug to the outlet. Symptom properly? Check Is the rear center speaker connected Remedy Refer to pages 9~10 to connect it properly. Refer to pages 11~12 to select LARGE or Is there static electricity in the air? Disconnect the power plug and connect it There is no sound from surround center speaker Is the SB SPK (Surround Center) SMALL. Refer to pages 35~36 to set Surround Mode again. Are the speaker and external Properly connect it. [. . . ]