User manual SAMSUNG AV-R700

[. . . ] Digital Surround AV Receiver System AV-R700 Instruction Manual ELECTRONICS AH68-01597B Safety Warnings CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN Precautions PREPARATION This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] CINEMA MATRIX GAME Each this button, MUSIC PROLOGIC will be selected in turn. MAIN UNIT 1 Press SURROUND button briefly to select "DPL llx" Mode. Each time you press this button, DPL ll x NEO:6 SFE STEREO will be selected in turn. OPERATION 2 Press SELECT( , ) button. ) button, MUSIC CINEMA MATRIX GAME PROLOGIC will be selected in turn. Each time you press SELECT ( ) button, PROLOGIC GAME MATRIX CINEMA MUSIC will be selected in turn. Each time you press SELECT ( To Exit Setup Mode Wait for about 5 seconds. To Exit Setup Mode Wait for about 5 seconds. Dolby Pro Logic ll x Mode MUSIC : Provide 5. 1 Channel Surround sound to digital, analog Sound will be output from some speaker only if you Caution! You cannot use Dolby Pro Logic ll x Mode for multi channel connect the external component only to Audio Input connector (or R) of the main unit. or existing stereo source such as CD, TAPE, FM, TV and Stereo VC. CINEMA : Provide 5. 1 Channel Surround sound to sound track of stereo movie encoded as Dolby Surround. MATRIX : You can feel 5. 1 Channel Surround sound enjoying the space of sound. GAME : When you play game, you can enjoy game with sound effect as if you are at actual site. PROLOGIC : Decode(3/1 Surround) the sound track of stereo music encoded as Dolby Surround to Dolby Pro Logic. signal encoded as Dolby Digital and DTS. You cannot use Dolby Pro Logic ll x Mode in 5. 1 multi- channel function. Pro Logic works only for PCM audio signals with sampling frequency of 32KHz, 44KHz or 48KHz. Sound will not be output from rear center speaker if PCM audio signal is not stereo but mono. 27 28 Dolby Pro Logic llx Effect This function works only in Dolby PRO LOGIC IIX MUSIC Mode. REMOTE CONTROL MODE button to select `MUSIC' Mode. 2 Presstime you press EFFECTC-WIDTH DIMENSION PANORAMA will be Each this button, selected in turn. MAIN UNIT 1 Press and hold SURROUND button for about 5 seconds. "SETUP MODE" appears on the display and enters into Setup Mode. Press 2 INPUTxbutton 8 times. "DPL ll MODE"appears on OPERATION 3 Press . . . button to select Dolby Pro Logic IIx effect you want. C-WIDTH: You can set from 0 to 7. PANORAMA: You can Set it ON or OFF. 3 Press SURROUND button. Each time you press this button, DIMENSION PANORAMA C-WIDTH will be selected in turn. 4 Repeat the steps 2 and 3 to set the Dolby Pro Logic IIx effect. SELECT( 4 Press you want. effect , ) button to select Dolby Pro Logic llx 5 Repeat the steps 3 and 4 to set Dolby Pro Logic llx effect. To Exit Setup Mode To Exit Setup Mode Wait for about 5 seconds . Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. "SETUP MODE OFF" appears on the display and exits Setup Mode. Dolby Pro Logic llx Effect C-WIDTH : Sound will be output from center speaker only. Front-left and front-right speaker give sound field effect only. In addition, sounds are output in different volumes from Front-Left, Front-Right Speaker and Center Speaker. DIMENSION : Adjust the sound balance if the sound is unbalanced to front or rear speaker. PANORAMA : Give the effect expanding and covering the sound from front-left and front-right Speaker to both walls. 29 30 NEO:6 Mode You can play back 2 channel sound in 6. 1 channel of 360 degree surround when enjoying music or movie. REMOTE CONTROL NEO:6 MODE button. 1 Presstime you press this button, MUSIC CINEMA will be selected in turn. Each MAIN UNIT SURROUND button briefly to select "NEO:6" Mode. 1 Presstime you press this button, DPL ll x NEO:6 SFE STEREO will be Each selected in turn. SELECT( ) 2 Presstime you press this , button, button. Each MUSIC OPERATION To Set Sound Image of Center Speaker If TV (or screen) is installed high, you can feel the balance of sound and image by raising the sound image of Center Speaker. To Exit Setup Mode Wait for about 5 seconds. 1 Press and hold SURROUND button for about 5 seconds. "SETUP MODE" appears on the display and enters into Setup Mode. [. . . ] If there is more than one code listed for your VCR (DVD) in the table, enter one at a time to determine which code works. Ex)For a `Samsung' VCR (DVD) While holding down POWER( ) button, use the Numeric button to enter 00, 32~45, 87, and 88. REALISTIC 044, 048, 054, 091, SAMSUNG MISCELLANENOUS SANYO SANSUI SCOTT SEARS SHARP SINGER SIGNATURE 2000(M. WARDS) SHINTOM SONY 5 If VCR (DVD) is turned on or off when you press the power button of the remote controller, the setting is completed. You can use VCR (DVD) POWER, VOLUNE, PLAY, PAUSE, STOP, SKIP and Numeric button (0~9). LXI(SEARS) MAGIN MAGNAVOX MARANTZ MARTA STS SYLVANIA SYMPHONIC TANDY The remote control may not work on some brands of VCR (DVD)s. Also, some operations may not be possible depending on your brand of VCR (DVD). If you do not set the remote control with the code for your brand VCR (DVD), the remote control work on a Samsung VCR (DVD) by default. 47 48 Before Calling for Service Symptom Can't turn it on. [. . . ]