User manual SAMSUNG AV-R710

[. . . ] Digital Surround AV Receiver System HT-AS710 AV-R710 THIS APPLIANCE IS MANUFACTURED BY: Instruction Manual AH68-01854B Safety Warnings Precautions GB PREPARATION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] MIN : Sets DRC effect to minimum. 30 31 Test tone Use test tone to check the speaker connection status or level. GB To automatically output test tone REMOTE CONTROL Press SETUP/MENU button, and then press ENTER 1 button. "SETUP MODE" appears on the display and goes into Setup Mode. MAIN UNIT button. 1 Press SETUPappears on the display and goes into Setup Mode. "SETUP MODE" 2 Press button to select the "TEST-T AUTO", and then press ENTER button. Test signal will be automatically output as follows; F. L CEN F. R S. R S. B S. L S. W . During test signal output, press . . . button to adjust the speaker output level 2 Press FUNCTION button to select the "TEST-T AUTO". 3 Press SURROUND button. Test signal will be automatically output as follows; F. L CEN F. R OPERATION from -10 to +10 dB by 1 step. S. R S. B S. L S. W . During test signal output, press SELECT ( , ) button to adjust the speaker output level from -10 to +10 dB by 1 step. To exit setup mode Press SETUP/MENU button once time. "SETUP OFF" appears on the display and test tone stops. To stop test tone Press SETUP button once time. "SETUP OFF" appears on the display and test tone stops. Using the Test Tone button Press TEST TONE button. Test signal will be automatically output as follows; F. L CEN F. R S. R S. B S. L S. W. During test tone output, press . . . button to adjust the speaker output level from -10 to +10 dB by 1 step. 32 33 Test tone(cont'd) Use test tone to check the speaker connection status or level. GB To Manually Output Test Tone REMOTE CONTROL Press SETUP/MENU button, and then press ENTER 1 button. "SETUP MODE" appears on the display and goes into Setup Mode. MAIN UNIT button. 1 Press SETUPappears on the display and the unit goes into Setup Mode. "SETUP MODE" button to select the 2 Press press ENTER button. "TEST-T MANU", and then You can adjust the speaker output level from -10 to +10dB by 1 step. Each time you press button, F. L CEN F. R S. R S. B S. L S. W will be selected in turn. 2 Press FUNCTION button to select the "TEST-T MANU". 3 Press SURROUND button. S. W will be selected in turn. OPERATION Each time you press this button, F. L CEN F. R S. R S. B S. L test tone as you want. button to set thelevel from -10 to +10dB by 1 step. You can adjust the speaker output The sound gets quieter at -10dB and louder at +10dB. 4 Press SELECT( want. , ) button to set the test tone as you You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. To exit setup mode Press SETUP/MENU button once time. To stop test tone Press SETUP button 1 time. "SETUP OFF" appears on the display and test tone stops. "SETUP OFF" appears on the display and test signal stops. Test Tone Output F. L (front left) : -10 ~ +10dB CEN (centre) : -10 ~ +10dB F. R (front right) : -10 ~ +10dB S. R (surround right) : -10 ~ +10dB S. B (surround back) : -10 ~ +10dB S. L (surround left) : -10 ~ +10dB S. W (subwoofer) : -10 ~ +10dB 34 35 Setting speaker level You can set the balance and level of speakers. GB REMOTE CONTROL 1 Press SETUP/MENU button, and then press ENTER button. "SETUP MODE" appears on the display and goes into Setup Mode. MAIN UNIT button 2 Presspress ENTERto select the "LEVEL SETUP", and then button. 1 Press SETUP button. "SETUP MODE" appears on the display and goes into Setup Mode. 3 Press button to select the speaker you want. Each time you press button, F. L CEN F. R S. R S. B S. L S. W will be selected in turn. 4 Press . . . button to set the speaker mode. You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB. 2 Press FUNCTION button to select the "LEVEL SETUP". 3 Presstime you press this button, F. L CEN F. R S. R S. B S. L Each OPERATION S. W will be selected in turn. 4 Press SELECT( you want. , ) button to set the speaker level To exit setup mode Wait for about 5 seconds or press SETUP/MENU button. "SETUP OFF" appears on the display and Setup Mode is exited. You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB. Using the SPK LEVEL button 1 Press SPK LEVEL button to select the speaker you want. Each time you press this button, F. L CEN F. R S. R S. B S. L To exit setup mode Wait for about 5 seconds or press SETUP button. "SETUP OFF" appears on the display and exits Setup Menu. S. W SPK LVL OFF will be selected in turn. 2 Press . . . button to set the speaker level you want. You can adjust it from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. Setting Speaker Level F. L (front left) : -10 ~ +10dB CEN (centre) : -10 ~ +10dB F. R (front right) : -10 ~ +10dB S. R (surround right) : -10 ~ +10dB S. B (surround back) : -10 ~ +10dB S. L (surround left) : -10 ~ +10dB S. W (subwoofer) : -10 ~ +10dB 36 37 Dolby Pro Logic llx mode This mode provides 6. 1 channel sound from 2 channel sources GB REMOTE CONTROL Press MODE button. Each time you press this button, CINEMA MATRIX GAME PL MUSIC will be selected in turn. MAIN UNIT 1 Press SURROUND button to select "DPLIIx" mode. Each time you press this button, DPLIIx NEO:6 SFE STEREO will be selected in turn. 2 Press SELECT( OPERATION , ) button. ) button, CINEMA MATRIX GAME PL MUSIC will be selected in turn. Each time you press SELECT ( ) button, MUSIC PL GAME MATRIX CINEMA will be selected in turn. Each time you press SELECT ( To exit setup mode Wait for about 5 seconds. To exit setup mode Wait for about 5 seconds. Dolby Pro Logic llx mode MUSIC : Provides 6. 1 channel surround sound to digital, You cannot use Dolby Pro Logic llx mode for multi channel analogue or existing stereo sources such as CD, TAPE, FM, TV and stereo VCR. CINEMA : Adds realism to the movie soundtrack. [. . . ] It does not work when the button is pressed. GB Check Is the power cord plugged into the outlet? Remedy Connect the power plug to the outlet. Symptom There is no sound from surround back speaker Check Is the surround back speaker Remedy Refer to pages 9~10 to connect it properly. Refer to pages 11~12 to select LARGE or connected properly? Is there static electricity in the air? Disconnect the power plug and connect it Is the SB SPK selected to NONE in SMALL. Refer to pages 35~36 to set Surround again. Are the speakers and external Connect them correctly. Press Mute button to cancel the function. [. . . ]