User manual SAMSUNG AV-XTJH028EE

[. . . ] AVXTJ£ª£ª_IB IM_E_29814. indd 1 2009-3-10 16:47:06 features of your new air conditioner · Slim & Smart Design Extremely slim and compact design will allow this air conditioner to fit in any kind of interior space. · function generates hydrogen(H) and oxygen(O2) to attack undesirable air contaminants such as bacteria, pollen, and odor. It makes you breathe better as if you were staying around waterfalls, ocean surf, rivers and mountains. · 2Way air outlet There are two separate air outlets for cooling and heating. Having warmer air coming out from the bottom part of the air outlet will spread the warm air evenly throughout the room. Stay cooler and warmer in every corner of your room. · Cost Efficient System Your new air conditioner not only provides maximum cooling power in the summer, but can also be an efficient heating method in the winter with the advanced "Heat Pump" system. [. . . ] button on the Vertical air flow direction is adjustable when the air conditioner is cooling the room. Horizontal air flow Make sure one of the blade pins that stick out of the air flow blades is not broken. Move the blade pins left or right to keep the air flow direction in a constant position you prefer. Cooling/Heating Heating To avoid any injuries, please move the blade pin after stopping Air Swing mode. While the air conditioner cools the room, operate the appliance with the air flow blades pointing upwards. If the unit operates in Cool mode for an extended period of time with the air flow blades pointing downward, moisture may generate from the temperature difference and thus carries the risk of electric shock or unit malfunction. CAUTION operating _19 AVXTJ£ª£ª_IB IM_E_29814. indd 19 2009-3-10 16:47:53 using advanced functions SETTING THE TIMER This advanced Timer function allows you to turn on/off your air conditioner automatically even when you are away. Simply set the time and your air conditioner will turn on/off automatically. On timer This function allows you to turn on the air conditioner automatically within the time range of 24 hours. On timer is available while your air conditioner is on/off. Press the On Timer button on the remote control. On timer indicator blinks on the remote control display. 2. Set the time you want the air conditioner to turn on automatically. Press the Time or button on the remote control to change the time setting while On timer indicator is blinking. You can set the time up to 24 hours, increasing in 30 minute unit up to first 3 hours and in hourly unit after first 3 hours. Press the Set/Cancel button on the remote control to active it on. The remote control display will show the hour(s) you have set. The air conditioner will operate automatically at set time and then On timer indicator disappears. If On timer is not set within 10 seconds, the air conditioner will end setting. 4. Press the Mode button on the remote control until the desired mode appears on the remote control display. The air conditioner will operate in the mode you set. On timer function is available in Auto/Cool/Dry/Fan/ Heat mode. · Temperature can also be adjusted. (See step 3 on page 15 for instructions. ) · After the set up while the unit is off, approximately after 10 seconds, all the other indicators will be gone except the On timer indicator and remaining time. · Setting time allows you to change by pressing the On Timer button. Press the Time or button to change time setting and then press the Set/Cancel button to active it on. 20_ using advanced functions AVXTJ£ª£ª_IB IM_E_29814. indd 20 2009-3-10 16:48:00 To deactivate the On timer 1. [. . . ] Connect the power cable{1(L), 2(N)} among the units within maximum length and communication cable(F1, F2) each. when installing the wired remote Control. Outdoor Unit 220-240V~ ENGLISH 3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose tightly with a clamp. If you don't use the other drain hose hole, block it with a rubber stopper. 5. [. . . ]