User manual SAMSUNG AVXWHH056EA-01

[. . . ] USER'S MANUAL Wall Mounted Type Series HB-Prestige : AVXWH ESPAÑOL ENGLISH DEUTSCH PORTUGUÊS ITALIANO FRANÇAIS System Air Conditioner (Cooling and Heating) E S F I P D DB98-27872A(2) Contents PREPARING YOUR AIR CONDITIONER Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Remote Control Batteries . . View of the Indoor unit 3 8 9 10 11 12 13 14 15 16 17 18 19 20 20 21 21 22 23 24 25 26 26 27 28 29 OPERATING YOUR AIR CONDITIONER Selecting the Auto Mode Selecting the Cool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can set the temperature between 26°C and 30°C. Note If you want to adjust temperature under 26°C, cancel the Energy Saving Function before adjusting the temperature. button to select the fan speed until the required setting is displayed. The fan speed indicator increases and decreases continuously and button. turns round each time you press the 4 Press the Note 5 To control the airflow direction, refer to page 21. E-18 Selecting the Auto Cleaning Function ENGLISH Auto Cleaning Function offers inside air conditioner dry to prevent mold growth. This feature allows you to use the air conditioner with more clean and fresh air. 1 Press the button. Remote Control When the air conditioner is turned off, The indicator on the indoor unit display appears and the Auto Cleaning Function runs. When the air conditioner is turned on, The indicator on the indoor unit display appears and the Auto Cleaning Function runs after stopping the air conditioner operation. Mode Auto(cool), Cool, Dry Auto(heat), Heat, Fan Operating time 30 minutes 15 minutes Control Panel Caution Auto Cleaning operating time varies according to the mode you selected before the air conditioner is turned off. Note The Auto Cleaning indicator appears only on the indoor unit display. When the air conditioner is turned on, the Auto Cleaning Function runs after stopping the air conditioner operation. E-19 Selecting the Sound On/Off Function You can turn on or off the sound of the air conditioner with the remote control. 1 Press the Note button to turn off the sound. Each time you press the selected repeatedly. On Off button, Sound On/Off Function is Selecting the Anions Function The air conditioner can generate anions with an ionizer in the indoor unit. Since it is an additional function, you can select it in any mode, even when the air conditioner is turned off. 1 Press the Result: button. If you press the button when the air conditioner is off, the air conditioner turns on automatically and generates anions in the Fan mode with Low fan speed. Note 2 Press the Result: button again to stop the Anions Function. The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the airflow direction, refer to page 21. E-20 Adjusting the Airflow Direction Vertically ENGLISH You can adjust the airflow direction vertically. The outer airflow blade moves up and down to increase the efficiency of the cooling or heating operation. 1 Press the Result: button until the required direction is set. The outer blade is adjusted vertically. 2 Press the button again to move the blade up and down automatically during operation. Press the Note button again to stop the blade moving up and down. If you turn the air conditioner. . . On Off 3 Then the blade. . . is closed completely set to the default position Adjusting the Airflow Direction Horizontally You can adjust the airflow direction horizontally manually. The inner blades with small fins moves the air in the required direction. 1 Adjust the inner blades by moving them to left or right. E-21 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time. You can set the time from 30 minutes to 24 hours. 1 Press the button until the required time is displayed to set the On Timer. You can set the time between 0. 5 hour and 24 hours. 2 Press the Result: button to complete the setting. [. . . ] Check if the air filter is blocked by dirt. Check if the there is cover on the outdoor unit or any obstacle. Check if you installed the air conditioner under direct sunlight. Check if you turn on the air conditioner just now. [. . . ]