User manual SAMSUNG AW08N0AE

[. . . ] The illustrations in the step-by-step procedures use four different symbols: PRESS PUSH IMPORTANT NOTE E-5 You must select the COOL mode if you wish to adjust the: Cooling temperature Fan speed when Cooling 18°C and 28°C. You can switch the air conditioner off whenever you want. Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the unit. Power Failure If a power failure occurs, the air conditioner is switched off. When the power comes back on, the air conditioner starts up again automatically. Temperature and Humidity Ranges The following table indicates the air conditioner's temperature and humidity operation range. [. . . ] (See the technical specifications) Check the power plug for disconnection. Check to see whether the operating mode selection dial is placed in the " Off " position. (Set it to the desired position. ) Check to see whether the room temperature is too low. - Refer to page 10 for details about temperature condition. Set the THERMOSTAT control to the desired position. - When the number on the THERMOSTAT control is too high, the room temperature may be too warm. Check to see whether there is an open window or other leakage of cool air to the outside. Check to see whether there is any obstacle adversely affecting the flow of the air inside and outside the room. - Remove the obstacle or change the position of the air conditioner. Check to see whether the air filter is clogged with dust or contaminated with foreign substances. [. . . ] 3 When installing the air conditioner, be sure to obtain sufficient space on the rear side of the unit for smooth flow of air. When operating the air conditioner in closed areas such as inner building with cooling operation, and result in trouble with the unit. [. . . ]