User manual SAMSUNG AW12FAJDA

[. . . ] Window-type Room Air Conditioner ( Cool ) Acondicionador de aire doméstico sistema de tipo ventana ( Refrigeración ) Climatiseur de type Fenêtre ( Refroidissement ) O ar Condicionado de Window-Type ( Refrigeração ) Condizionatore d'aria per ambienti da finestra ( Raffreddamento ) E S F P I DB68-01741A(12) ITALIANO AW06FASAA AW06AASAA AW07FASAA/AB/BA/DA/EA AW07AASAA/AB/BA/DA/EA AW08FASAA/AB AW08AASAA/AB AW09FASAA/BA/DA/EA AW09AASAA/BA/DA/EA AW10FAJAA/BA/CA AW10AAJAA/BA/CA AW12FAJAA/BA/CA/DA/EA AW12AAJAA/BA/CA/DA/EA AW12FAMAA/BA/CA/DA/EA AW12AAMAA/BA/CA/DA/EA AW14FAMAA/BA/CA AW14AAMAA/BA/CA AW18FAMBA/CA/DA/EA/EB AW18AAMBA/CA/DA/EA/EB AW18FAMBB AW18AAMBB AWT18FAMBA/BC/DA/EA/EB AWT18AAMBA/BC/DA/EA/EB AWT19FAMBA/EA/EB AWT19AAMBA/EA/EB AWT20FAMBA AWT20AAMBA AW22FAMBA/EA AW22AAMBA/EA AW22FAMBB AW22AAMBB AW24FAMBA/EA AW24AAMBA/EA AW24FAMBB/BC/BD AW24AAMBB/BC/BD AWT24FAMBA/BC/EA/EB AWT24AAMBA/BC/EA/EB PORTUGUÊS FRANÇAIS ESPAÑOL OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION MANUAL DE INSTRUÇÕES ISTRUZIONI PER L'USO ENGLISH Safety Precautions The following safety precautions must be taken when installing and using your air conditioner. 1 The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring, earthing and safety regulations. Depending on national regulations and your specific installation, you may need to install: x A circuit breaker For further information on electrical requirements, contact a professional electrician. This device must be installed according to the national electrical rules. 2 Make sure that the unit is correctly ventilated at all times; do NOT place clothing or other materials over it. 3 NEVER spill liquids of any kind into the unit. Should this happen, unplug the unit and contact your installation specialist. 4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan and you may be hurt. [. . . ] x The air conditioner starts up in Fan mode. When the air conditioner is in Fan mode, the temperature is not displayed; in this case, you do not need to set the temperature. x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up x Press the button on the remote control. or x Press the on the unit until the indicator lights up Each time you press a button, the unit beeps. E-9 x x 4 To set the fan speed to. . . or x on the remote control or unit (The air conditioner operates in the mode selected when the unit was last used. ) E-11 Setting the Off Timer Remote Control Control Panel The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 1 hour to 24 hours. You can select the Off timer only when the air conditioner is on. 1 Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. 2 Set the operating time by pressing: x Timer on the remote control or x Timer on the unit one or more times. Possible times are between 1 hour and 24 hour inclusive. Result: x The remaining time is displayed and decreased by 1 hour automatically to indicate the remaining time. x The air conditioner switches off automatically when the operating time reaches zero. You can change the setting mode, fan speed, and air flow direction after setting the Off timer. To Cancel the Off Timer To cancel the timer, press: x Timer on the remote control or unit one or more times until " " is displayed. or x on the remote control or unit (The air conditioner operates in the mode selected when the unit was last used. ) E-12 Setting the Sleep timer ENGLISH The Sleep Timer can be used when you are cooling your room to switch the air conditioner off automatically after a period of 8 hours. 1 2 If you wish to switch the unit off at a specific time, refer to page 12. Make sure that you have selected either COOL mode. Press the or Press the Result: button on the remote control button on the unit. x Each time you press a button, the unit beeps. x The "SLEEP" passes through the control panel for about 15 seconds and the " " will be displayed. x The remaining time is displayed and decreased by 1 hour automatically to indicate the remaining time. x The air conditioner will be controlled as illustration below. Remote Control Control Panel Cooling When the temperature has been increased by 1°C (after 1 hour), it is maintained for 7 hours. To Cancel the Sleep Timer To cancel the timer, press: x on the remote control. x The SLEEP indicator is no longer displayed. x The air conditioner operates in the mode selected last. If you select the Energy Saving mode in the Sleep Timer mode, the Sleep Timer will be cancelled and the air conditioner will start up in the Energy Saving mode. E-13 Selecting Energy Saving mode Remote Control Control Panel 1 If you wish to save energy when using your air conditioner, select the energy saving mode with the Energy Saver button. [. . . ] Replace the remote control batteries if necessary. Check that the correct operating mode has been selected COOL. Dust may be blocking the air filter; refer to page 15 or 16 for cleaning instructions. Check that there is no obstacle blocking the air flow into or out of the unit. [. . . ]