User manual SAMSUNG AW18PHA

[. . . ] USER'S MANUAL AW08PH AW08PK AW12PH AW12PK AW18PH AW18PK AW24PH AW24PK AW122PB Series Series Series Series Series Series Series Series Window-type Room Air Conditioner (Cooling) E S DB98-6004A(4) Register your product at www. samsung. com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING DURING OPERATION u Risk of electric shock. · Disconnect all remote electric power supplies before servicing, installing or cleaning. · This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. [. . . ] : Low Speed : Med Speed : High speed 5 To control the direction of the air flow, refer to page . , or button on the remote control as desired. E-8 Airing Your Room If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside. If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: The air inside the room circulates and stale air is evacuated outside. Otherwise, push the ventilation lever to the left and the closed position ( Result: ). The air simply circulates inside the room. Remote Control If necessary, press the Result: (On/Off) button. Control Panel The air conditioner starts up in the Cool mode. The unit beeps twice. 3 If the FAN indicator is not lit up on the unit: Press the or Press the Result: button on the unit one or more times until the FAN / button. indicator lights up The unit beeps each time you press the The air conditioner starts up in Fan mode. When the air conditioner is in the Fan mode, the temperature is not dis played; in this case, you do not need to set the temperature. button on the remote control 4 To set the fan speed to. . . Press the or Press the button on the unit one or more times until the desired fen speed(F, F, or F3) is displayed. : Low Speed : Med Speed : High speed , or button on the remote control as desired. 5 To control the direction of the air flow, refer to page . E-9 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. Upwards. Adjust the air flow blades to the desired position, by pushing them upwards or downwards. If you orient the air flow blades downwards and the unit operates in Cool mode for a long period of time, dew may: From on the surface of the blades Drip from the blades E- Setting the On Timer Remote Control Control Panel The On Timer enables you to switch on the air conditioner automatically after a given period time. You can set the period of time from 1 hour to 24 hours. You can select the On Timer only when the air conditioner is off. Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. Set the operating time by pressing: on the remote control. Possible time is between hour and 4 hours inclusive. Result: The remaining time is displayed and decreased by hour automatically to indicate the remaining time. The air conditioner switches on automatically when the operating time reaches zero. You can change the fan speed and others after setting the On Timer. To Cancel the On Timer To cancel the On Timer, press: " or (On/Off) button on the remote control or unit. on the remote control or " is displayed. on the unit one or more times until E- Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 1 hour to 24 hours. You can select the Off Timer only when the air conditioner is on. Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. Remote Control Control Panel Set the operating time by pressing: on the remote control. Possible time is between hour and 4 hours inclusive. Result: The remaining time is displayed and decreased by hour automatically to indicate the remaining time. [. . . ] Replace the remote control batteries if necessary. The air conditioner does not cool Check that the correct operating mode has been selected COOL. . Dust may be blocking the air filter; refer to page 6 for cleaning instructions. Check that there is no obstacle blocking the air flow into or out of the unit. [. . . ]