User manual SAMSUNG AZ12PHA

[. . . ] Window-type Room Air Conditioner (Cooling and Heating ) E S F P I DB98-40A(3) DB98-22420A-1. indd 23 2006-5-31 16:31:39 ITALIANO PORTUGUÊS FRANÇAIS ESPAÑOL AZ09PH AZ12PH Series Series ENGLISH USER'S MANUAL Register your product at www. samsung. com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING DURING OPERATION u Risk of electric shock. · Disconnect all remote electric power supplies before servicing, installing or cleaning. · This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. [. . . ] or Press the on the unit until the indicator lights up Press the button on the remote control. or Press the on the unit until the indicator lights up High Med Low Result: 5 E-0 Each time you press a button, the unit beeps. To control the direction of the air flow, refer to page . DB98-22420A-1. indd 10 2006-5-31 16:31:31 Adjusting the Air Flow Direction Horizontally Depending on the position of the unit in your room, you can adjust the orientation of the inner air flow blades on the right-hand side of the unit, thus increasing the efficiency of the air conditioner. Press the Result: (or on the unit) button on the remote control. ENGLISH E- 16:31:32 Remote Control Control Panel The inner blades swing automatically left and right. The blades may stop swinging momentarily when the Deice function is activated (see page 5 for further details on this function. )They will start swinging again automatically as soon as the Deice function stops. To stop the blades moving left and right, press the button on the remote control. (or on the unit) To stop the blades in a specific position and orient the air flow in the corresponding direction, simply press the (or on the unit) button on the remote control when the blades are in the desired position. Adjusting the Air Flow Direction Vertically Again depending on the position of the unit in your room, you can adjust the orientation of the outer air flow blades on the right-hand side of the unit. RECOMMENDATION When. . . Cooling Heating Adjust the blades to face. . . Downwards Adjust the air flow blades to the desired position, by pushing them upwards or downwards. If you orient the air flow blades downwards and the unit operates in Cool mode for a long period of time, dew may: From on the surface of the blades Drip from the blades DB98-22420A-1. indd 11 2006-5-31 Setting the On Timer Remote Control Control Panel The On Timer enables you to switch on the air conditioner automatically after a given period time. You can set the period of time from 1 hour to 24 hours. You can set the period of time from 1 hour to 24 hours. You can select the On Timer only when the air conditioner is off. Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. Set the required mode by pressing the appropriate button: , or on the remote control. Mode button on the unit (press it one or more times until the appropriate operating mode indicator lights up) 3 Set the operating time by pressing: Timer on the remote control. or Timer on the unit one or more times. Possible time is between hour and 4 hours inclusive. Result: The remaining time is displayed and decreased by hour automatically to indicate the remaining time. The air conditioner switches on automatically when the operating time reaches zero. You can change the setting mode, fan speed, and air flow direction after setting the On timer. To Cancel the On Timer To cancel the On Timer, press: Timer on the remote control or unit one or more times until " displayed. or on the remote control or unit (The air conditioner operates in the mode selected when the unit was last used. ) " is E- DB98-22420A-1. indd 12 2006-5-31 16:31:33 Setting the Off Timer ENGLISH The Off Timer enables you to switch off the air conditioner automatically after a given period of time. You can set the period of time from 1 hour to 24 hours. You can select the Off Timer only when the air conditioner is on. Check that the air conditioner has been switched on; if necessary, press the (On/Off) button. Remote Control Control Panel Set the operating time by pressing: Timer on the remote control. or Timer on the unit one or more times. Possible times are between hour and 4 hours inclusive. Result: The remaining time is displayed and decreased by hour automatically to indicate the remaining time. The air conditioner switches off automatically when the operating time reaches zero. You can change the fan speed and air flow direction and others after setting the Off Timer. To Cancel the Off Timer To cancel the Off Timer, press: Timer on the remote control or unit one or more times until " displayed. or on the remote control or unit (The air conditioner operates in the mode selected when the unit was last used. ) " is E-3 DB98-22420A-1. indd 13 2006-5-31 16:31:34 Setting the Sleep Timer The Sleep Timer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of 8 hours. If you wish to switch the unit off at a specific time, refer to page 3. Make sure that you have selected either COOL or HEAT mode. Remote Control Control Panel Press the or Press the Result: button on the remote control button on the unit until the SLEEP indicator lights up. [. . . ] - Refer to the specifications on the label attached to the unit. Installation Conditions As the unit is heavy, the wall or window of the installation area should have sufficient strength and durability for operation of the air conditioner, and for prevention of any vibration or noise. If it is weak, reinforcement work should be performed separately. It is advisable to install the air conditioner in the north or west side to prevent the effect of direct sunlight. [. . . ]