User manual SAMSUNG B2230HD

[. . . ] SyncMaster B1930HD / B2030HD / B2230HD / B2330HD / B2430HD LCD TV Monitor User Manual The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-3 INSTALLING THE PRODUCT Package Contents . 2-3 Attaching a Wall Mount/Desktop Stand . 2-7 Connecting Using an HDMI to DVI Cable . [. . . ] · · <Audio Description> Turn the audio description function on or off. <Volume> You can adjust the audio description volume. · Volume is active when Audio Description is set to On. While viewing a Digital channel, this function can be selected. Auto Volume Reduces the differences in volume level among channels. · <Off> - <Normal> - <Night> Speaker Select If you want to hear the sound through separate speakers, cancel the internal amplifier. · <External Speaker> - <TV Speaker> · · If you select <External Speaker> in the <Speaker Select> menu, the sound settings will be limited. The volume and [MUTE] buttons do not operate when the <Speaker Select> is set to <External Speaker>. Please set the volume on your Home theatre. Additional Setting Digital channels only · DTV Audio Level This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. · · · According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between 10dB and 0dB. To increase or decrease the volume, adjust between the range 0 and -10 respectively. SPDIF Output SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. · Audio Format During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital. Audio Delay Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). · · Dolby Digital Comp This function minimizes signal disparity between a dolby digital signal and a voice signal (i. e. Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. · · Line Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. Sound Reset You can restore the Sound settings to the factory defaults. · <OK> - <Cancel> Using the Product 3-5 Selecting the Sound Mode When you set to <Dual I-II> the current sound mode is displayed on the screen. Audio Type A2 Stereo Mono Stereo Dual NICAM Stereo Mono Stereo Dual MONO MONO Dual I / II MONO STEREO DUAL I MONO DUAL II DEFAULT Automatic change Automatic change DUAL I Automatic change Automatic change DUAL I MONO STEREO DUAL I DUAL II · · · If the stereo signal is weak and an automatic switching occurs, then switch to the mono. This function is only activated in stereo sound signal. This function is only available in <TV> mode. Channel MENU Antenna You can select antenna or cable TV. DESCRIPTION If [ANT IN] connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen. · Country <Air> - <Cable> Select the country in which the product is being used before you use the Auto Store feature. If you do not see your country in the list, select others. [. . . ] 455. 6 x 309. 4 x 67. 7 mm (17. 9 x 12. 2 x 2. 7 inches) (Without Stand) / 4. 05 kg (8. 9 Ibs) 455. 6 x 375. 0 x 178. 0 mm (17. 9 x 14. 8 x 7. 0 inches) (With Stand) / 4. 25 kg (9. 4 Ibs) 492. 4 x 311. 2 x 67. 5 mm (19. 4 x 12. 3 x 2. 7 inches) (Without Stand) / 4. 53 kg (10. 0 Ibs) 492. 4 x 407. 5 x 197. 0 mm (19. 4 x 16. 0 x 9. 6 inches) (With Stand) / 4. 77 kg (10. 5 Ibs) VESA Mounting Interface Environmental considerations Operating 75 mm x 75 mm (2. 95 inches x 2. 95 inches) Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt 0° ~ 20° (±1°) 6-1 More Information 6-1-2. B2230HD / B2330HD / B2430HD MODEL NAME LCD Panel Screen Size Display Area Pixel Pitch Synchronization Colour Resolution Optimal Resolution Maximum Resolution Horizontal Frequency Vertical Frequency B2230HD 21. 53 inches (54 cm) 476. 64 mm (H) x 268. 11 mm (V) 0. 24825 mm (H) x 0. 24825 mm (V) 30 ~ 81 kHz 56 ~ 75 Hz 16. 7 M 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Analogue(D-Sub port), Digital DVI(HDMI port) Input Signal, Terminated 0. 7 Vp-p ± 5 % Separate Type H/V Sync, Composite TTL Level (V high 2. 0 V, V low 0. 8 V) Maximum Pixel Clock Power Supply Dimension (Width x Height x Depth) / Weight 148. 500 MHz (Analogue, Digital) This product supports 100 ­ 240 V. Since the standard voltage may differ from country to country, please check the label on the back of the product. 523. 8 x 350. 6 x 67. 8 mm (20. 6 x 13. 8 x 2. 7 inches) (Without Stand) / 4. 66 kg (10. 3 Ibs) 523. 8 x 416. 7 x 197. 0 mm (20. 6 x 16. 4 x 7. 8 inches) (With Stand) / 4. 91 kg (10. 9 Ibs) VESA Mounting Interface Environmental considerations Operating 560. 4 x 370. 0 x 67. 9 mm (22. 0 x 14. 6 x 2. 7 inches) (Without Stand) / 5. 15 kg (11. 4 Ibs) 560. 4 x 436. 7 x 197. 0 mm (22. 0 x 17. 2 x 7. 8 inches) (With Stand) / 5. 5 kg (12. 1 Ibs) 582. 0 x 381. 8 x 67. 9 mm (22. 9 x 15. 0 x 2. 7 inches) (Without Stand) / 5. 45 kg (12. 0 Ibs) 582. 0 x 448. 0 x 197. 0 mm (22. 9 x 17. 6 x 7. 8 inches) (With Stand) / 5. 8 kg (12. 8 Ibs) B2330HD 23 inches (58 cm) 509. 76 mm (H) X 286. 74 mm (V) 0. 2655 mm (H) x 0. 2655 mm (V) B2430HD 24 inches (61 cm) 531. 36 mm (H) X 298. 89 mm (V) 0. 27675 mm (H) x 0. 27675 mm (V) 75 mm x 75 mm (2. 95 inches x 2. 95 inches) Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Tilt 0° ~ 20° (±1°) Design and specifications are subject to change without prior notice. [. . . ]