User manual SAMSUNG BD-F5500E

[. . . ] BD-F5500 BD-F5500E Blu-ray™ Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol indicates "dangerous voltage" CAUTION: TO REDUCE THE RISK OF This symbol indicates important instructions inside the product that presents a risk of ELECTRIC SHOCK, DO NOT REMOVE accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit. [. . . ] For more information, please see the TV user manual. Anynet+ (HDMI-CEC) ✎✎ NOTES Network Test Use this menu item to check whether your network connection is working or not. For instructions explaining how to play content located on your PC, see page 17. Network Status Use to check whether a connection to a network and the Internet has been established. System Settings BD-Live Internet Connection Initial Settings Set to allow or prohibit an Internet connection when you use the BD-LIVE service. • Allow (All) : The Internet connection is allowed for all BD-LIVE contents. €¢ Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate. • Prohibit : No Internet connection is allowed for any BD-LIVE content. œŽâœŽ NOTES The DLNA Function `` The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer. By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual (page 10). Quick Start DLNA lets you play music, video, and photo files located in your PC or NAS on the player. To use DLNA with your player, you must connect the player to your network. œŽâœŽ NOTES You can turn on the power quickly by decreasing the boot time. `` If this function is set to On, Standby power consumption will be increased. `` This function is not available if the HDMI cable does not support CEC. `` If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. `` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. `` If you have Anynet+ turned on, when you turn off the product, disconnect, and then reconnect the power cable, the product turns on automatically to re-establish the Anynet+ connection. After about 15 seconds, it turns off again automatically. `` Some Samsung TVs, when connected to this product using the Anynet+ function will, when you turn them on, display a warning popup message saying no connection has been found. [. . . ] -- DivX Certified® to play DivX® video up to HD 1080p , including premium content. DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under licence. Covered by one or more of the following U. €¢ The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ]