User manual SAMSUNG BD-P2550

[. . . ] Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Key features of your new Blu-ray Disc Player HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. [. . . ] The selected language will only appear if it is supported on the disc. Allows you to set up the Audio device and sound status depending on the audio system being used with the player. With the unit in Stop mode, press the MENU button. Press the buttons to select the desired audio option from the options described below, then press the ENTER or button. Blu-ray Discs may include three audio streams. - Effect Audio : You may hear menu prompt sounds (etc. Recommended choice if you You can enjoy Primary, You cannot hear DTS-HD Master have an HDMI 1. 2 Secondary and Effect audio Audio sound with this setting receiver which cannot decode together. You can also enjoy Dolby receiver which has DTS-HD Also recommended if you are TrueHD sound even if your Master Audio decoding using an optical cable for audio receiver cannot decode Dolby capability. You can enjoy Primary, Recommended choice if you Audio quality may be lower than don't have an HDMI supported PCM or Bitstream (Audiophile) receiver, but have a receiver with setups. Recommended choice if you have an HDMI 1. Bitstream together into PCM audio, then Secondary and Effect audio (Re-encode) re-encodes the PCM audio into together. Outputs only the Primary audio soundtrack (main soundtrack Bitstream of the movie) so that your (Audiophile) receiver can decode the audio bitstream. You can enjoy DTS-HD Master Audio sound if you have HDMI You will not hear Secondary and 1. Be sure to select the correct Digital Output or you will hear no sound or a loud noise. If the HDMI device (Receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio Secondary and Effect audio will not be heard with regular DVDs. Some Blu-ray Discs do not have Secondary and Effect audio. This Digital Output setup does not effect the analog (L/R) audio or HDMI audio output to your TV. When the player outputs HD audio bitstream(Dolby TrueHD or DTS-HD Master Audio) from the Optical jack to On : Select this when the Amplifier connected to the player is not 96KHz compatible. 96KHz signals will be down converted to 48KHz · Off : Select this when the Amplifier connected to the player is 96KHz compatible. Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the optical digital outputs. If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the unit may output PCM 2ch downmixed audio even though you set Bitstream(either Re-encode or Audiophile) on your setup menu. [. . . ] Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal liability. Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this Manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-Video, and Audio CD discs; BD-RE, BD-R, DVD-RW / DVD-R discs; and CD-RW/CD-R discs. [. . . ]