User manual SAMSUNG BD-P2550/XAA

[. . . ] BD-P2500 BD-P2550 Blu-ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/global/register key features of your new Blu-ray Disc Player Player Features Supports a Variety of Video Disc Types Supports Blu-ray (BD-ROM, BD-RE, BD-R), DVD Video and DVD-RW/-R (V mode and finalized only) discs. HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. Blu-ray Disc Features Blu-ray Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. [. . . ] 96KHz signals will be down converted to 48KHz ~ Off : Select this when the Amplifier connected to the player is 96KHz compatible. Signals will be output without any changes. System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup Digital Output : PCM PCM Down Sampling : On n O Off Dynamic Compression : On Speaker Setup No Disc M` Even when PCM Down Sampling is set to Off, some discs will only output downsampled audio through the optical digital outputs. HDMI ~ If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the unit may output PCM 2ch downmixed audio even though you set Bitstream(either Re-encode or Audiophile) on your setup menu. ~ If your TV is not compatible with PCM sampling rates over 48kHz, the unit may output 48kHz downsampled PCM audio even though you set "PCM Down Sampling" as "Off". Dynamic Compression This is only active when a Dolby Digital signal is detected. ~ Off : You can enjoy the movie with the standard Dynamic Range. ~ On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup Digital Output : PCM PCM Down Sampling : On Dynamic Compression : On Speaker Setup Off No Disc English _ audio setup Speaker Setup If you have connected this player to an Amp/Receiver or Home theater via the 7. 1 channel Analog outputs you need to set the Speaker Options for the best sound. To setup, follow steps 1 to 3 in "Setting up the Audio Options" on page 36. Press the buttons to select Speaker Setup, then press the ENTER or button. Press the % buttons to select the desired Speaker, then press the ENTER button to change speaker setup. When done, use the % buttons to select Save, then press the ENTER button. If you don't want to save your settings, use the % buttons to select Cancel, then press the ENTER button. System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup PCM Down Sampling : On Dynamic Compression : On Speaker Setup System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup No Disc No Disc Speaker Setup Front (L, R) Center (C) Surround (LS, RS) Subwoofer (LFE) Surround Back (LSB, RSB) Large, Small Large, Small, None Large, Small, None On, Off a Test Tone s Select No Disc PCM Down Sampling : On Language Setup Music Speaker Setup Setup Audio Setup Display Setup Network Setup Parental Setup Dynamic Compression : On Speaker Setup Front LFE Center Surround Surround Back Save : : : : : Small On Small Small Small Cancel r Return Large, Small, None Speaker ~ Large : Delivers full bandwidth sound with bass below 100 Hz. ~ Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front Speaker. ~ None : Select to disable the speakers. Subwoofer Speaker ~ On : Select to use the subwoofer speaker. ~ Off : Select to disable the subwoofer speaker. (This option can only be selected when the Front (L+R) speakers are set to Large. ) Press the RED(A) button ~ A test tone will be sent to L ; C ; R ; RS ; RSB ; LSB ; LS ; LFE in order so you can make sure the speakers are set up correctly. ~ To end the test tone, press the RED (A) button again. ~ The test tone can only be activated when no discs are in the unit. ~ The test tone outputs through the 7. 1 channel analog outputs only. M` _ audio setup Press the RETURN to return to the previous menu. display setup SETTING UP THE DISPLAY OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. With the unit in Stop mode, press the MENU button. Press the % buttons to select Setup, then press the ENTER or button. [. . . ] Transportation to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective during the limited warranty period specified above. The product must be returned during the warranty period with transportation charges prepaid to SAMSUNG's designated service center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. [. . . ]