User manual SAMSUNG BDUP5000-XAA

[. . . ] Duo HD Player Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. 1-800-SAMSUNG (7267864)/www. samsung. com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 1-800-SAMSUNG (7267864) www. samsung. com/us User's Manual BD-UP5000 AK68-01477A key features of your new Duo HD player Player Features Supports a Variety of Video Disc Types Supports BD, HD DVD, DVD Video, DVD-RW/-R (V mode and finalized only). HDMI (High Definition Multimedia Interface) HDMI reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV. [. . . ] ~ If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On. Dynamic Compression This is only active when a Dolby Digital signal is detected. ~ Off : You can enjoy the movie with the standard Dynamic Range. ~ On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup Digital Output : PCM PCM Down Sampling : On Dynamic Compression : On Speaker Setup Off No Disc _ audio setup SeTTING UP THe SPeAKeR OPTIONS If you have connected this player to an Amp/Receiver or Home theater via the 7. 1 channel Analog outputs you need to set the Speaker Options for the best sound. With the unit in Stop mode, press the MeNU button. Press the % buttons to select Setup, then press the eNTeR or + button. Music Setup No Disc System Setup Language Setup Audio Setup Display Setup HDMI Setup AUDIO SeTUP Network Setup Parental Setup . Press the % buttons to select Audio Setup, then press the eNTeR or + button. No Disc System Setup Music Setup Language Setup Audio Setup Display Setup HDMI Setup Network Setup Parental Setup PCM Down Sampling : On Dynamic Compression : On Speaker Setup . Press the % buttons to select Speaker Setup, then press the eNTeR or + button. Press the %_+ buttons to select the desired Speaker, then press the eNTeR button. When done, use the %_+ buttons to select Save, then press the eNTeR button. If you don't want to save your work, use the %_+ buttons to select Cancel, then press the eNTeR button. No Disc PCM Down Sampling : On Language Setup Music SpeakerSetup Setup Audio Setup Display Setup Network Setup Parental Setup Dynamic Compression : On Speaker Setup Front LFe Center Surround Surround Back Save a TestTone s Select : : : : : Small On Small Small Small Cancel r Return M` Speaker Setup Front (L, R) Center (C) Surround (LS, RS) Subwoofer (LFE) Surround Back (LSB, RSB) Press the RETURN or _ button to return to the previous menu. Large, Small Large, Small, None Large, Small, None On, Off Large, Small, None Subwoofer Speaker ~ On : Select to use the subwoofer speaker. ~ Off : Select to disable the subwoofer speaker. (This option can only be selected when the Front (L+R) speakers are set to Large. ) Press the ReD(A) button ~ A test tone will be sent to L ; C ; R ; RS ; RSB ; LSB ; LS ; LFe in order so you can make sure the speakers are set up correctly. ~ To end the test tone, press the ReD (A) button again. ~ The test tone can only be activated when no discs are in the unit. ~ The test tone outputs through the 7. 1 channel analog outputs only. Speaker ~ Large : Delivers full bandwidth sound with bass below 100 Hz. ~ Small : If LFE is on, bass below 100 Hz will be outputted through a Subwoofer instead of the speakers. If LFE is off and the Front Speaker is set to Large, sound will be outputted through the Front Speaker. · None : Select to disable the speakers. English _ display setup SeTTING UP THe VIDeO DISPLAY/OUTPUT OPTIONS This function allows you to setup the TV screen settings. This function depends on the disc or TV type. With the unit in Stop mode, press the MeNU button. Press the % buttons to select Setup, then press the eNTeR or + button. Press the % buttons to select Display Setup, then press the eNTeR or + button. [. . . ] Transportation to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defective during the limited warranty period specified above. The product must be returned during the warranty period with transportation charges prepaid to SAMSUNG's designated service center. Prior to returning any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. [. . . ]