User manual SAMSUNG BHM1500

[. . . ] English Using your headset 1 Frequently asked questions. Appendix 2 Safety information To prevent injury to yourself and others or damage to your device, read the safety information about your device before using the device. €¢â€¢ Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle. €¢â€¢ Do not disassemble, modify, or repair your device. [. . . ] 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1500) from the list of devices found by your phone. 11 4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2. The headset also can be paired via the Active pairing feature, see page 14. Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected with two Bluetooth phones at the same time. 1 After connecting with the first Bluetooth phone, press and hold the Talk button until the blue indicator light stays lit. 2 Press and hold the Volume up button to activate the Multi-point feature. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone’s user manual). 12 4 Select the headset (HM1500) from the list of devices found by the second Bluetooth phone. 5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone. 6 Reconnect to the headset from the first Bluetooth phone. €¢â€¢ You can set the headset automatically to reconnect to the recently connected phones each time you turn it on. -- To reconnect to the two most recently connected phones, activate the Multi-point feature. Press and hold the Volume up button in Pairing mode until the blue indicator light flashes twice. -- To reconnect to only the most recently connected phone, deactivate the Multi-point feature. Press and hold the Volume down button in Pairing mode until the red indicator light flashes twice. €¢â€¢ When the headset connects to two Bluetooth phones, some phones may not connect to the headset as the second Bluetooth phone. English Disconnecting the headset To disconnect the headset from your phone, •• Turn off the headset. €¢â€¢ Use the Bluetooth menu on your phone. 13 Reconnecting the headset When the headset is paired with a phone, it will attempt to automatically reconnect each time you turn it on. [. . . ] Appliances such as cordless phones and wireless networking equipment may cause interference, which usually sounds like static. To reduce any interference, keep the headset away from other devices that use or produce radio waves. Your headset produces significantly less power than a typical mobile phone. It also only emits signals that are in compliance with the international Bluetooth standard. [. . . ]