User manual SAMSUNG BLUETOOTH MONO HEADSET HM1800

[. . . ] 8 English Using your headset Turning the headset on or off. 24 1 Please read this manual before operating your headset, and keep it for future reference. Graphics used in this manual are for illustration purposes. copyright Copyright © 2011 Samsung Electronics This user manual is protected under international copyright laws. [. . . ] If the Voice prompts turned off, The red indicator light flashes 2 times and the repeated mention is stopped. English List of voice prompts Status When you turn the headset on or off When you enter Pairing mode When you connect the headset to devices When you disconnect the headset from the device When a call is ended Voice prompt “Power on” or “Power off” “Ready to pair. Pin code is 0000” “Connected” “Disconnected” “Call terminated” 11 Pairing and connecting the headset Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In Pairing mode, two devices should be placed close enough to each other. Pairing and connecting the headset with a phone 1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes. ) • With the headset turned on, press and hold the Talk button for 3 seconds. € If the headset is turned on for the first time, it will go into Pairing mode immediately. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1800) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on. Your headset supports the Simple Pairing feature which allows the headset to be paired with a Bluetooth device without requesting a PIN. This feature is available for devices that are compliant with Bluetooth version 2. 12 Pairing via the Active pairing feature With the Active pairing feature, your headset automatically looks for a Bluetooth device within range and tries to make a connection with it. Make sure the phone’s Bluetooth visibility option is set on. € In Pairing mode, press and hold the Talk button on the headset. The indicator light colour changes to violet from blue. The headset will attempt active paring for up to 20 seconds. € The Bluetooth phone you want to connect with must not be paired with other devices. If the phone is already connected to another device, end the connection and restart the Active pairing feature. € This feature may not be supported on some devices. [. . . ] € Specifically exempt from any warranty are limited-life consumable components such as batteries and other accessories. € Samsung will not assume any responsibility for any loss or damage incurred in shipping. All repair work on Samsung products by unauthorised third parties voids any warranty. * Depending on your region, the length of warranty may vary. [. . . ]