User manual SAMSUNG BN68-02849B

[. . . ] Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Thank you for purchasing this Samsung product. To receive more complete service, please register your product at Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. [. . . ] ­ To delete the last letter or number you entered, press the Green button on your remote. When done, press the Blue button on your remote. Wait until the connection confirmation message is displayed, and then press the ENTERE button. If the AP is set to Hidden (Invisible), you have to select AddNetwork and enter the correct NetworkName(SSID) and SecurityKey to establish the connection. You can connect to a mobile device without an access point through the "Samsung Wireless LAN Adapter" by using a peer to peer network. If the other methods do not work, you need to enter the Network setting values manually. GettingtheNetworkConnectionValues To get the Network connection values on most Windows computers, follow these steps: 1. Howtosetupmanually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. Press the button to go to the first entry field (IP Address). Use the number buttons to enter numbers. When done with each field, use the button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. Select your network, and then press the ENTERE button. 34), and follow the directions from that point on. This function is available when SWL(Samsung Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. Input the generated NetworkName(SSID) and SecurityKey into the device you want to connect. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. If security key is required, input the security key. This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV. IfYourTVFailstoConnecttotheInternet Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then authenticates each time you connect to the Internet as a way of preventing unauthorized access. [. . . ] The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst your watching TV. To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. The cable/set top box remote control doesn't turn the TV on or off, or adjust the volume. a "Mode Not Supported" message appears. [. . . ]