User manual SAMSUNG BX2050

[. . . ] SyncMaster BX1950/BX1950N/BX2050/BX2050N/BX2250/BX2250N/BX2350/BX2450/ BX2450L/BX2450N LCD Monitor User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-3 INSTALLING THE PRODUCT Package Contents . 2-5 USING THE PRODUCT Setting the Optimal Resolution . 3-13 Using the Screen Adjustment Menu (OSD: On Screen Display) . [. . . ] This will save power and reduce eye fatigue. <Custom> Select this mode when you want to adjust the image according to your preferences · · This can only be set when the external input is connected through HDMI/DVI and <PC/AV Mode> is set to <AV>. This menu is unavailable when <MagicAngle> or <MagicEco> is set. Using the product 3-14 Menu Description This feature allows you to see optimal screen quality according to your viewing position. When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front. Set to <Off> when viewing directly in front of the screen. · · · · · · <Off> - Select when viewing from the front position. - Select when viewing from a slightly lower position. - Select when viewing from the lower position. -Select when viewing from the upper position. - Select when viewing from the left or right position. , , position at the same <Lean Back Mode1> <Lean Back Mode2> <Standing Mode> <Side Mode> <Group View> - Select when two or more persons view among time. MagicAngle · <Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default. Users can set suitable picture quality as needed. · · This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> or <Cinema> mode. This menu is unavailable when <MagicColor> or <Color Effect> is set. Removes vertical noise lines (line pattern) from the screen. Coarse The location of the screen may be changed after the adjustment. In this case, move the screen so that the screen is displayed at the center of the display panel using the <H-Position> menu. This function is only available in Analog mode. Removes horizontal noise lines (line pattern) from the screen. Fine If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then use the <Fine> function again. This function is only available in Analog mode. 3-14 Using the product Menu Description Accelerates the response time of the LCD panel faster than the original response time so that moving pictures appear sharper and more natural. · <Normal> <Faster> <Fastest> · · It is recommended setting the <Normal> or <Faster> when not viewing a movie. Monitor functions may vary according to models. Please refer to actual product. Response Time · · When watching with a DVD or set-top box connecting to the product via HDMI, image quality deterioration (black level, lower-quality contrast, lighter color tone, etc. ) may occur depending on the connected external device. [. . . ] Class B (Information Communication equipment for residential use) This device is registered for EMC requirements for home use (Class B). (Class B equipment emits less electromagnetic waves than Class A equipment. ) 6-17 More Information 6-18 Power Saving Function This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. [. . . ]