User manual SAMSUNG SYNCMASTER C27A550U

[. . . ] User Manual C23A550U / C27A550U The color and the appearance may differ depending on product, and the specifications are subject to change without prior notice to improve the performance. Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. [. . . ] The following screen will appear. Return Adjust Enter 4 Adjust the Blue using the [ ] button. 5 Configuring Tint 49 5 5. 4 Configuring Tint Color Tone Adjust the general color tone of the picture. This option is not available when This option is not available when Only available in Analog or HDMI mode. Angle is enabled. Color is in Full or Intelligent mode. 5. 4. 1 Configuring the Color Tone Settings 1 2 3 Press [ m ] on the product. Press [ Press [ ] to move to COLOR and press [ ] on the product. The following screen will appear. ] to move to Color Tone and press [ COLOR Red Green Blue Color Tone Gamma 50 50 50 Cool 2 Cool 1 Normal Warm 1 Warm 2 Custom Adjust Enter Return Cool2: Set the color temperature to be cooler than Cool1. Cool1: Set the color temperature to be cooler than Normal mode. Normal: Display the standard color tone. Warm1: Set the color temperature to be warmer than Normal mode. Warm2: Set the color temperature to be warmer than Warm1. ] to move to the option you want and press the [ ]. 4 5 Press [ The selected option will be applied. 5 Configuring Tint 50 5 5. 5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. This option is not available when Angle is enabled. 5. 5. 1 Configuring Gamma 1 2 3 Press [ m ] on the product. Press [ Press [ ] to move to COLOR and press [ ] to move to Gamma and press [ COLOR Red Green Blue Color Tone Gamma Normal Mode1 Mode2 Mode3 50 50 50 ] on the product. The following screen will appear. Return Adjust Enter 4 5 Press [ ] to move to the option you want and press the [ ]. The selected option will be applied. 5 Configuring Tint 51 6 6. 1 Resizing or Relocating the Screen Auto Adjustment This function can be used to automatically adjust the Coarse, Fine and position settings. This function can be used to automatically detect and remove noise on the screen and correct the screen position. This function will automatically run if the screen resolution is changed. Only available in Analog mode. 6. 1. 1 Configuring the Auto Adjustment Settings 1 2 3 Press [ m ] on the product. ] to move to SIZE&POSITION and press [ ] to move to Auto Adjustment and press [ ] on the product. The following screen will Auto Adjustment 50% 6. 2 Size Change the picture size. 6. 2. 1 Changing the Picture Size 1 2 3 Press [ m ] on the product. Press [ Press [ ] to move to SIZE&POSITION and press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear. In PC mode SIZE&POSITION Auto Adjustment Image Size H-Position V-Position Menu H-Position Menu V-Position 50 50 10 Auto Wide Return Adjust Enter Auto: Display the picture according to the aspect ratio of the input source. 6 Resizing or Relocating the Screen 52 6 Resizing or Relocating the Screen Wide: Display the picture in full screen regardless of the aspect ratio of the input source. In AV mode SIZE&POSITION Auto Adjustment Image Size H-Position V-Position Menu H-Position Menu V-Position 50 10 4:3 16 : 9 Screen Fit Return Adjust Enter 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. 16:9: Display the picture with an aspect ratio of 16. 9. Suitable for DVD content or widescreen broadcasts. Screen Fit: Display the picture with the original aspect ratio without cutting off. [. . . ] This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Appendix 81 Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB HUB refers to a device that is a common connection point for multiple devices connected over a network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single network. Coarse Coarse refers to the frequency of radio wave vibrations per second. A higher frequency transmits a larger amount of data and is reflected easier. [. . . ]