User manual SAMSUNG CB-21M16ML

[. . . ] Mode CS CB System PAL-B/G, D/K, I, SECAM-B/G, D/K, I, NTSC4. 43 (NTSC3. 58; option) PAL-B/G PAL-B/G, D/K, I, SECAM-B/G, D/K, I, NTSC4. 43 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! CAUTION : TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ! WARNING : TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. CZ 2 Infrared Remote Control (Depending on Model) Buttons and markings are subject to change TELEVISION STAND-BY DIRECT CHANNEL SELECTION ONE/TWO /THREE-DIGIT CHANNEL SELECTION SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED NEXT CHANNEL VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF EXTERNAL INPUT SELECTION VOLUME DECREASE TUNER/CABLE NETWORK SELECTION MENU DISPLAY PREVIOUS CHANNEL INFORMATION DISPLAY EXIT FROM ANY DISPLAY MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY SOUND EFFECT SELECTION GAME KEY TURBO SOUND CHANGE CONFIRMATION PICTURE SIZE AUTOMATIC SWITCH OFF PICTURE MODEL SLECTION SOUND MODE SELECTION CHANNEL SCAN KEY The performance of the remote control may be affected by bright light. 3 Connecting the Aerial (or Cable Television Network) To view television channel correctly, a signal must be received by the set from one of the following sources: An outdoor aerial A cable television network Plug the arrial or cable network input cable to the 75 coaxial socket on the rear of the television. 75 Rear of TV Cable Television Network Switching Your Television On and Off The mains lead is attached to the rear of the television 1 The mains voltage is indicated on the ear of the TV set and the frequency is 50 or 60Hz. 2 Plug the mains lead into an appropriate socket. Press the POWER Result : (ON/OFF) button on the front of the television. The standby indicator lights up on the front panel 3 Press the POWER button on the remote control to switch the television on. [. . . ] Press the or button to move to the hour or minute. Set the hour or minute by pressing the or button. When you have finished, press the MENU button. Result : The message "ENJOY YOUR WATCHING" is displayed. 7 ENJOY YOUR WATCHING If you want to reset this feature. . . 1 2 TV PLUG & PLAY SETUP LANG. : ENGLISH TIME CHILD LOCK MORE MOVE ENTER RETURN Press the MENU button then pess the or button to select the "Set UP", and then press Enter button. button, and then Select the "Plug & Play" by pressing the or Enter button. press the Result : The message "Plug & Play " is displayed. Choosing Your Language TV PLUG & PLAY LANG. : ENGLISH TIME CHILD LOCK MORE MOVE ENTER RETURN 3 When you have finished, press the EXIT button or press the MENU button repeatedly to return to normal viewing. SETUP When you start using your television for the first time you must select the language, which will be used for displaying menus and indications. "Set UP". 2 Press + or - button to select the "Language" and select a particular language by pressing the Enter button repeatedly. 5 7 Sorting the Stored Channels TV AUTO STORE MANUAL STORE ADD/DELETE SORT CHANNEL You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU button and Press the or "Channel" and Press the Enter button. Result : 3 or button to select the Enter MOVE ENTER EXIT 2 button to select the "Sort" and Press the TV FROM TO STORE :P1 : P--:? SORT The "Sort" menu is displayed with the "From" selected. Press the or button until the channel number that you wish to change is displayed. Result : The Selected channel's picture is displayed. or button to select the "To". 4 MOVE ADJUST RETURN Press the TV FROM TO STORE :P1 : P--3 : OK 5 SORT Press the or button until the new number by which you wish to identify the channel is displayed. Result : The seleted channel is exchanged with the one pervious stored to the chosen number. Example : If you select "P1" for the "From" and "P3" for the "To" : Channel 1 become channel 3. Channel 3 become channel1. MOVE ENTER RETURN 6 To Confirm the exchange of channel number Press the. . . or button to select the "Store". Enter button. Result : "OK" is displayed. You can exchange other channel numbers by seleting "From" and returning to step 3 7 When you have finished, sorting channels, Press the EXIT button or press the MENU button repeatedly to return to normal viewing. 8 Changing the Picture Standard TV PICTURE MODE : DYNAMIC CUSTOM COLOR TONE : NORMAL SIZE : NORMAL MORE You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: Dynamic, Standard, Movie, Custom. 1 Press the MENU button & Press Result : 2 or button to select picture. The "Picture" menu is displayed. Press the ENTER button. [. . . ] Ev ery time you push in one box, you will gain one score . And after you move all of the boxes to the red destination, you succeessfully pass the stage , and then you will see a prompt as sho wn in the picture. If y ou press k ey up, y ou can continue to challenge yourself to stage 2, but if you do not w ant to continue, you can just prss key doen to return to the game selection menu. The most important instruction is , y ou can have one chance to step back if you move a wrong step. [. . . ]