User manual SAMSUNG CL-29M40MQ

[. . . ] COLOR TELEVISION CL29K40PQ/CL29K40MQ/CL29M40MQ Connection Panel (depending on the model) The product color and shape may vary depending on the model. Side Jack Rear Jack OE OE ¨ ´ Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register ´ Control Panel (depending on the model) The product color and shape may vary depending on the model. Whenever you connect an audio or video system to your TV, ensure that all elements are switched off. Please be sure to match the color coded input terminals and cable jacks. Front Panel OE Audio/Video Output Jacks Connect to the audio/video input jacks of a recording VCR. [. . . ] There are three steps for memorizing channels: "Air/Cable", "Auto Program" and "Add/Delete". Air/Cable Channel Before your TV can begin Air/Cable :Air Air memorizing the available Auto Program Cable Add/Delete channels, you must Fine Tune Name specify the type of signal LNA : Off source that is connected to the TV (i. e. , an Move Enter Return antenna or a cable system). Select "Air" or "Cable" by pressing the . . . Auto Program All available channels are automatically stored in memory when channels are selected by the direct tuning function. Press the ENTER button at any time to interrupt the memorization process. Add/Delete You can add or delete a channel to display the channels you want only. To use the Add/Delete function, first run Auto Program. Select "Deleted" or "Added" by pressing the . . . or button. Channel - Fine Tune The Fine Tuning function lets Fine Tune you manually adjust the TV's 3 1 tuner if you have difficulty Reset tuning channels. Move Adjust the fine tuning by Adjust Return pressing the oe or button. To store the fine tuning setting in the TV's memory, press the MENU button. To reset the fine tuning to "0", select "Reset" by pressing the or button, then press the ENTER button. Setup - Time Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button. ) Time Clock -Sleep Timer On Timer -Off Timer -On Timer Channel On Timer Volume : : : : -- am Off -- am Off -- am Off : 3 : 10 Move Enter Return Channel - Name Use this feature to assign an Name . . . More easy-to-remember label to 2 :A 3 : ---any channel (i. e. , "CBS", 4 : ---5 : ---"ESPN", "PBS2", "CNN1", 6 : --- More etc. ). A label consists of four fields, where each field is a Move Adjust Return letter (A~Z), a number (0~9), -, or a blank. When the INFO button is pressed, the channel label will appear next to the channel number. Sleep Timer You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from "30 Min. " to "180 Min. "). On Timer / Off Timer You can set the On/Off timers so that the TV will switch on or off automatically at the time you select. On Timer Channel The preferred channel can be set for when the timer automatically turns on the TV. On Timer Volume The preferred volume can be set for when the timer automatically turns on the TV. Search Air 3 3% Stop Enter Return Channel - LNA (depending on the model) When a weak broadcast Channel Air/Cable : Air signal causes an unclear, Auto Program Add/Delete noisy picture, the "LNA" Fine Tune Name feature improves the picture Off LNA : Off On quality by setting to "On". If you experience noise on a Move Enter Return certain channel, set the "LNA" to "On" or "Off" for this channel, to obtain the optimum picture. Auto Power Off Add/Delete . . . [. . . ] Check that the batteries are drained. Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Make sure the program is broadcast in color. If you are using a VCR, check the tracking. [. . . ]