User manual SAMSUNG CL-32Z7HE INTRODUCTION

[. . . ] CL29Z7H/CL29Z6H CL32Z7H/CL32Z6H CL34Z7H/CL34Z6H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Owner's Instructions AA68-02816A-00(ENG) COLOR TELEVISION Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the MENU button to exit. The TV automatically cycles through all of the available channels and stores them in memory. Press MENU at any time to interrupt the memorization process and return to the Channel menu. w 3. 6 CHAPTER THREE: TV OPERATION O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the MENU button to display the menu. Press the CH w button to select "Channel", then press the VOL+ button. 2 Press the CH v or CH w button to select "Add/Erase", then press the VOL+ button. 3 Press the VOL+ button. Press the CH v/w button or the number buttons to select the channel you want to add or erase. Press the MENU button. 4 Press the CH v or CH w button to select "Select". Press the VOL+ or VOLbutton to select "Added" or "Erased". Press the MENU button to exit. CHAPTER THREE: TV OPERATION 3. 7 O P E R AT I O N Changing Channels Using the Channel Buttons 1 Press the CH v or CH w button to change channels. When you press CH v or CH w, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels. ) You will not see channels that were either erased or not memorized. Directly Accessing Channels Use the number buttons to quickly tune to any channel. 1 Press the number buttons to go directly to a channel. For example, to select channel 27, press "2" then "7". The TV will change channels when you press the second number. When you use the number buttons, you can directly select channels that were either erased or not memorized. To select a channel over 100, press the +100 button. (For channel 122, press "+100" then "2" then "2". ) To change to single-digit channels (0­9) faster, press "0" before the single digit. (For channel "4" press "0" then "4". ) Using the PRE-CH Button to select the Previous Channel 1 Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them. w Adjusting the Volume Press VOL + or ­ VOL to increase or decrease the volume. Using Mute At any time, you can temporarily cut off the sound using the Mute button. 1 Press MUTE and the sound cuts off. The word "Mute" will appear in the lower-left corner of the screen. 2 To turn mute off, press MUTE again, or simply press either the VOL ­ or VOL + button. 3. 8 CHAPTER THREE: TV OPERATION O P E R AT I O N Labeling the Channels Use this feature to assign an easy-to-remember label to any channel (i. e. , "CBS", "ESPN", "PBS2", CNN1", etc. ) A label consists of four fields, where each field is a letter, a number, "*", or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. 1 Press the CH v or CH w button to tune to the channel that will be labeled. 2 Press the MENU button to display the menu, then press the CH w button to select "Channel". Press the VOL + button. Note: You cannot select "Labeling" in the A/V mode. w 3 Press the CH w button to select "Labeling". [. . . ] The image in the PIP window will appear on the main screen, and vice versa. Press the MENU button to exit. 4. 21 CHAPTER FOUR: SPECIAL FEATURES S P E C I A L F E AT U R E S Changing the PIP Channel 1 Press the MENU button to display the menu. Press the CHw to select the "PIP", then press the VOL + button. Quick way to access the PIP channel: Just press the CHv or CHw button(blue color) on the remote control. w 2 Press the VOL + button to select PIP "On. " 3 Press the CHw to select the "Channel", then press the VOL + button. Press the CHv or CHw button to change the channel that appears in the PIP window. [. . . ]