User manual SAMSUNG CLP-650N

[. . . ] This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any changes, direct or indirect, arising from or related to use of this manual. © 2005 Samsung Electronics Co. , Ltd. [. . . ] An invalid toner cartridge has been installed. Do this. . . Unplug the power cord and plug it in again. If the problem persists, call for service. Unplug the power cord and plug it in again. If the problem persists, call for service. Unplug the power cord and plug it in again. If the problem persists, call for service. Unplug the power cord and plug it in again. If the problem persists, call for service. Install the corresponding color toner cartridge. Install the paper transfer belt. Message Load [Size] In Tray1 Load [Size] In Tray2 Load [Size] In MP Low Density Status The paper size specified in the printer properties does not match the paper you are loading. Do this. . . Load the correct paper in the tray. Install [Color] Toner Install Transfer Belt Invalid Toner [Color] The amount of the toner which is spread on the paper transfer belt for adjusting auto color registration is very small, so that the printer does not recognize the toner during auto color registration. A problem has occurred in the Left Fan of the printer. A problem has occurred in the development motor of the printer. The printer does not have enough memory to print the current job. An error has occurred in the firmware program of the printer. Replace the toner cartridge(s) with a new one. If you still have the same problem, contact a service representative. Left Fan Error Unplug the power cord and plug it in again. If the problem persists, call for service. Unplug the power cord and plug it in again. If the problem persists, call for service. The job automatically clears and the printer returns to Standby Mode. Lower the print resolution and try again. Main Motor Error Only install Samsung toner cartridges, designed for your printer. [. . . ] The printer name which appears in the printer properties window may differ depending on the printer in use. Except for the name, the composition of the printer properties window is similar. Layout Setting The Layout tab provides options to adjust how the document appears on the printed page. You can print multiple pages on one sheet of paper. Select Layout from the Presets drop-down list to access the following features. [. . . ]