User manual SAMSUNG CS-20Q1ML INTRODUCTION

[. . . ] ELECT COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS PICTURE IN PICTURE TELETEXT FUNCTION (depending on the model) ENG Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% H 5° 35° H 75% Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%). Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ! WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. [. . . ] Press the L or M button to select the "Channel" and press the + or ­ button. Press the L or M button to select the "Add/Erase" and press the or ­ button. Result: The "Add/Erase" menu is displayed. + Channel Auto store Manual store Name Add/Erase Fine tune Sort Select Enter Exit 4 5 6 Press the L or M button to select the required channel. To add or erase the desired channel by pressing the + or ­ button. When you have finished adding and erasing channels, press the TV button or, press the MENU button repeatedly to return to normal viewing Add/Erase P P P P 0 1 2 3 : : : : Added Added Added Added Select Adjust Exit Add/Erase P P P P 0 1 2 3 : : : : Erased Added Added Added Select Adjust Exit 17 Fine tuning Channel Reception ENG Channel Auto store Manual store Name Add/Erase Fine tune Sort Select Enter Exit If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to finetune the channel manually. 1 2 3 Press the MENU button. Press the L or M button to select the "Channel" and press the + or ­ button. Press the L or M button to select the "Fine tune" and press the or ­ button. Result: + Fine tune Tune Store Erase : -/+ :?:? The "Fine tune" menu is displayed with the "Tune" selected. obtain a sharp and clear picture and good sound quality + or ­ button. Result: The horizontal bar's cursor moves to the left or right. Fine tune memorise adjusted picture or sound N L or M button to select the "Store". N L or M button to select the "Erase". Result: "OK" is displayed. erase adjusted picture or sound Fine tune Tune Store Erase : -/+ : OK :? 5 When you have finished, press the TV button or, press the MENU button repeatedly to return to normal viewing. Select Adjust Exit Fine tune Tune Store Erase : -/+ :?: OK Select Adjust Exit 18 Sorting the Stored Channels ENG You can exchange the numbers of two channels, in order to: N Modify the numeric order in which the channels have been automatically stored. N Give easily remembered numbers to the channels that you watch most often. Channel Auto store Manual store Name Add/Erase Fine tune Sort Select Enter Exit 1 2 3 Press the MENU button. Press the L or M button to select the "Channel" and press the + or ­ button. Sort Press the L or M button to select the "Sort" and press the button. Result: + or ­ From To Store :P1 : P-:? The "Sort" menu is displayed with the "From" selected. 4 Press the + or ­ button until the channel number that you wish to change is displayed. Result: The selected channel's picture is displayed. Select Adjust Exit 5 6 Press the L or M button to select the "To". Press the + or ­ button until the new number by which you wish to identify the channel is displayed. Result: The selected channel is exchanged with the one previously stored to the chosen number. Select From To Store Sort :P1 :P3 :? Adjust Exit Example: If you select " P 1" for the "From" and "P 3" for the "To": N Channel 1 becomes channel 3. N Channel 3 becomes channel 1. Sort 7 To. . . Confirm the exchange of channel numbers Press the. . . [. . . ] Press the colored button corresponding to the topic that you wish to select (The available topics are listed on the status information line). Result: The page is displayed with additional color-coded information that can be selected in the same way. button to return to the 3 To display the: Previous page Next page 4 When you have finished, press the TV normal broadcast. Storing Teletext Pages Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. 2 3 4 5 Press the colored button corresponding to the page that will be replaced. [. . . ]