User manual SAMSUNG CS-21S8MH

[. . . ] COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. REMOTE CONTROL ON-SCREEN MENUS ENJOY GAME (depending on the model) TELETEXT FUNCTION (depending on the model) ENG Safety Instructions ENG The following illustrations represent the precautions to be taken when using and moving your television. 10% H 5¡ 35¡ H 75% Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions. Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. [. . . ] Give easily remembered numbers to the channels that you watch most often. Channel Auto Store Manual Store Add/Erase Fine Tune Sort 1 2 3 Press the MENU button. Press the or button to select the Channel and press the oe or button. Press the or button to select the Sort and press the oe or button. Result: The Sort menu is displayed with the From selected. Select Enter Exit Channel Sort From To Store :P1 : P-:? 4 Press the oe or button until the channel number that you wish to change is displayed. Result: The selected channel's picture is displayed. Select Adjust Exit Channel 5 6 Press the or button to select the To. Press the oe or button until the new number by which you wish to identify the channel is displayed. Result: The selected channel is exchanged with the one previously stored to the chosen number. Sort From To Store :P1 :P3 :? Select Adjust Exit Example: If you select P 1 for the From and P 3 for the To: Channel 1 becomes channel 3. Channel 3 becomes channel 1. Channel Sort From To Store :P3 :P1 : OK 7 To. . . Confirm the exchange of channel numbers Press the. . . Result: OK is displayed. You can exchange other channel numbers by selecting From and returning to step 4. Select Adjust Exit 8 When you have finished sorting channels, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing 19 Selecting a Channel Numbered Ten or Over ENG When using the numeric buttons to select a channel stored at programme position ten or higher, follow the instructions below. 1 Press the -/-- button. Result: The "--" symbol is displayed. 2 Enter the two-digit channel number. Example: To select channel 42, press 4, followed by 2. Changing the Picture Standard Picture oe Mode Adjust Digital NR Tilt Custom : Off :0 You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: Custom, Standard, Sports, Natural, Mild. 1 Press the MENU button. Result: The Picture menu is displayed. Select Adjust Exit 2 Press the oe or button. Result: The Mode menu is selected. 3 4 Select to satisfy your preference by pressing the oe or button. When you have been finished, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing. You can select the required picture effect by simply pressing the "P, MODE" (Picture Mode) button on the remote control. 20 Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality: Color Tone, Contrast, Brightness, Sharpness, Color, Tint (NTSC only) oe Mode Adjust Digital NR Tilt Picture Custom : Off :0 1 Press the MENU button. Result: The Picture menu is displayed. Select Enter Exit 2 3 Press the oe or button. Press the or button to select the Adjust, and then press the oe or button. Result: When select the Mode to Custom, the Adjust menu is displayed. Result: You select the required option (Normal, Warm1, Warm2, Cool1, Cool2). Result: The horizontal bar is displayed. Picture Adjust Color Tone: Contrast Brightness Sharpness Color Normal 100 50 50 50 4 To adjust the. . . Color Tone Select Adjust Exit Contrast Brightness Sharpness Color Tint (NTSC only) Picture Adjust Color Tone: Contrast Brightness Sharpness Color Normal 100 50 50 50 5 The Sharpness and Tint are not available in DVD mode. When you are satisfied with the settings, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing. Select Adjust Exit Contrast 100 The television has an "automatic degaussing" system that is activated if magnetic interference is present. [. . . ] To freeze the display on a given page, press the (hold). Using the various display options: To display. . . Both teletext information and the normal broadcast Hidden text (answers to quiz games, for example) The normal screen A secondary page, by entering its 4-digit number The next page The previous page Double-size letters in the: · Upper half of the screen · Lower half of the screen Normal screen Press the. . . TTX/MIX ( ) 3 (reveal) (reveal) again (sub-page) (page up) (page down) (size) Once Twice Three times 35 Using FLOF to Select a Teletext Page (depending on the model) ENG The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control. 1 2 Display the teletext contents page by pressing the TTX/MIX ( button. ) Press the colored button corresponding to the topic that you wish to select (The available topics are listed on the status information line). [. . . ]