User manual SAMSUNG CS-21T20ZQQ

[. . . ] To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ connector is used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. continued. . . Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The OE (AUDIO-L/R) and ´ (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. [. . . ] 1 Plug & Play If the television is in standby mode, press the POWER button on the remote control. It flickers for a little while, and then Language menu is displayed. 5 When the channel searching has finished, the Time menu is displayed with Clock selected. Time Clock Move -- : -- am Exit 2 3 4 6 7 Press the oe or button to move to the hour or minute. Set the hour or minute by pressing the . . . or button. ENJOY YOUR WATCHING When you have finished, press the MENU button. The ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated. 2 5 Select the appropriated Language language by pressing the . . . Input Check If any language is not Auto Store Exit selected, the language menu will disappear about 30 seconds later. Make sure that the antenna is connected to the television (refer to page 1). Press the oe or button to search the channels. To stop the search, press the MENU button. P1 471 MHz 48% Re-setting the Plug & Play Method: MENU . . . / (Function) oe/ . . . / (Plug & Play) oe/ Function Language : English Time Plug & Play Blue Screen : Off Child Lock Select Enter Exit 3 4 Exit continued. . . English - 3 Channel - Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Child Lock cannot be released Select Adjust Exit using front (or side) panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children. Function - Language It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. Function Language : English Time Plug & Play Blue Screen : Off Child Lock Select Adjust Exit Timer Select On to activate the On/Off timers. On time / Off time You can set the On/Off timers so that the television will switch on or off automatically at the time you select. Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. Press the SLEEP button on the remote control. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed. Child Lock: On/Off If you want to unlock a channel, set to Off. Lock: When press the oe or button, the Locked is displayed. If any channel is locked, you can not enter the Channel menu by using the control buttons on the television, and the Not available is displayed. You can access by using the remote control only. Function - Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. a Function Language : English Time Plug & Play Blue Screen : Off Child Lock Select Adjust Exit Auto Power Off When you set the timer "On", the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. [. . . ] If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save teletext page into list using the (store) button. (page down) Used to display the previous teletext page. (reveal) Used to display the hidden text (answers to quiz games, for example). [. . . ]