User manual SAMSUNG CS-21Z40MA

[. . . ] COLOUR TELEVISION CS-21Z40/21Z45 Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Connecting to the RCA Output 6 The RCA6 connectors are used for equipment, such as a recording VCR or audio system. Connecting to the RCA Input The RCA4 and RCA5 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector. ) 7 The RCA7 connectors are used for equipment such as a DVD with component output (480i only). Front (or Side) Panel Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. [. . . ] To exit without sorting, press the EXIT button. Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Colour System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Channel :C1 Store :?choose: - Whether or not to store each Move Adjust Return of the channels found - The programme number of each stored channel which you wish to identify Channel - Add/Delete Add/Delete TV You can exclude channels you . . . More have chosen from the channels P 1 : Added you scanned. When you scan P 2 : Added P 3 : Added through the stored channels, P 4 : Added P 5 : Added those you have chosen to skip More are not displayed. All of the Move Enter Return channels that you did not specifically choose to skip are displayed during scanning. Programme (Programme number to be assigned to a channel) Colour System: AUTO/PAL/SECAM/NTSC4. 43/NTSC3. 58 Sound System: BG/DK/I/M Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Channel (When you know the number of the channel to be stored) You can also select the channel number directly by pressing the numeric buttons (0~9). Store (When you store the channel and associated programme number) Method: ENTER . . . / ENTER : Select Added or Deleted. Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Method: oe/ : You can obtain a sharp and clear picture and good sound quality. . . . / ENTER : You can reset the setting. MENU : You can memorise adjusted picture or sound. Fine Tune P1 Reset Move Adjust Return 0 Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. TV From To Store : P 1 ----: P-- ----:?Sort If there is no sound or abnormal sound, re-select the sound standard required. Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You must Move Enter Return also set the time if you wish to use the automatic on or off timers. When pressing the "I" button (On/Off) on the front (or side) of the television, the clock setting will be reset. Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. Melody You can hear melody sound when the television is powered on or off. Setup - Child Lock Child Lock TV This feature allows you to Child Lock : On prevent unauthorized users, Programme :P1 such as children, from watching Lock :?unsuitable programmes by muting out video and audio. Child Lock cannot be released Move Enter Return using front (or side) panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children. Demonstration To become familiar with the various menus provided by the television, you can view the in built demonstration. [. . . ] Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the colour settings. [. . . ]