User manual SAMSUNG CS-21Z55Z3Q

[. . . ] Color TElEVISIoN CS21Z45Z3Q/CS21Z47Z3Q/ CS21A730E3/CS21Z43Z3Q/ CS21Z50Z3Q/CS21Z57Z3Q/ CS21Z55Z3Q/CS21Z58Z3Q/ CS21B850F3/CS21A751J3/ CS21A750Jl Connection Panel (depending on the model) The product color and shape may vary depending on the model. rear Panel Front (or Side) Panel owner's Instructions Before operating, please read this manual carefully, and retain it for future reference. Register your product at www. samsung. com/global/register or 1 Audio input 2 Video input cable television network 3 Headphone jack Control Panel (depending on the model) The product color and shape may vary depending on the model. Front (or Side) Panel Whenever you connect an audio or video system to your television, ensure that all elements are switched off. [. . . ] Method: / : You can obtain a sharp and clear picture and good sound quality. ENTEr : You can memorise adjusted picture or sound. Fine Tune P1 Reset Move Adjust Save Return 0 Setup - Time Clock You can set the television clock so that the current time is displayed when pressing the INFo button on the remote control. You must also set the time if you wish to use the automatic on or off timers. TV 00:00 Clock Sleep Timer : Off Scheduler Time Move Enter Return Channel - Channel Grouping You can choose your category and find your desired channel in a few seconds. You can save a channel under the following categories-Movie, Music, News, Sport, and User. / : Used to select the desired channel group. You can also press ToolS button and enter Easy View to use this function. TV Group Select : Sport Set Channel Group Channel Grouping Sleep Timer You can select a time period of between 30 and 180 minutes after which the TV automatically switches to standby mode. You can also press the ToolS button to enter Sleep Timer. Move Adjust Return P P P P P P P P 1 2 3 4 5 6 7 8 Movie Music News Sport User Set Channel Group Scheduler Scheduler TV You can set the scheduler P On Time Off Time Set 1. -- --:---:-No to make the TV return to a 2. -- --:---:-No particular channel at a pre3. -- --:---:-No 4. -- --:---:-No set time. 5. -- --:---:-No Upto 5 Programs can On Timer Volume 10 be scheduled at a time. Move Enter Return If the Clock is not set in the Time menu, a pop-up warning will flash if user tries to enter Scheduler. You can also press ToolS button and enter Easy View to use this function. Move Adjust Return on Timer Volume The preferred volume can be set for when the timer automatically turns on the TV. Method: / : Move to the program hour or minute. / ENTEr : Set option of YES/NO to activate/deactive the operation. Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. Channel - Add/Delete You can exclude channels you have chosen from the channels you scanned. Move Enter Exit You can select these options simply by pressing the ToolS button on the remote control and enter Sound Mode. Equalizer The television has several settings which allow you to control the sound quality. If you make any changes to these settings, the sound mode is automatically switched to Custom. You can also press the ToolS button to enter Equalizer. Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Pseudo Stereo This feature converts a monaural sound signal into two identical left and right channels. Once the Pseudo Stereo is set to on or off, these settings apply to the sound effects such as Standard, Music, Movie, and Speech. [. . . ] In the List save mode, you can save teletext page into list using the (store) button. (size) Press to display the double-size letters in the upper half of the screen. For lower half of the screen, press it again. To display normal screen, press it once again. Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. [. . . ]