User manual SAMSUNG CS-21Z58ZQQ

[. . . ] Please be sure to match the color coded input terminals and cable jacks. Please be sure to match the color coded input terminals and cable jacks. OE ´ ¨ ^ Ø Input source selection On-screen menu display Volume adjustment Channel selection Standby indicator Remote control sensor Power on/off Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the OE (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART´ and SCART connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. [. . . ] Select the appropriated language by pressing the Enter Exit . . . If any language is not selected, the language menu will disappear about 30 seconds later. 9 Enjoy your watching When you have finished, press the MENU button. The Enjoy your watching is displayed, and then the channel which has been stored will be activated. Setup Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration Move Enter Return 2 3 4 3 Make sure that the antenna is connected to the television (refer to page 1). The Auto Store menu is displayed with Area selected. TV Area Search Auto Store ASIA W/EUROPE : Belgie CIS E/EUROPE CHINA HONGKONG U/K AUSTRALIA NZ/INDONESIA SOUTH AFRICA AMERICA Re-setting the Plug & Play Method: MENU . . . / (Setup) ENTER . . . / (Plug & Play) ENTER TV Move Enter Return 4 5 6 Press the ENTER button again. To search the channels, select Search by pressing the . . . Press the ENTER button again to start search channels. To stop the search, press the ENTER button. When the channel searching has finished, the Time menu is displayed with Clock selected. Search 5 Start Enter Search P 1 C-- ----Stop Enter TV Return Time - - : - - am Clock Sleep Timer : Off - - : - - am Off On Timer Off Timer - - : - - am Off On Timer Volume : 10 Return Input Source List / Edit Name Source List TV Source List TV You can switch between AV1 ---viewing signal from AV2 ---S-Video ---connected equipment, such Component ---as a VCR, DVD, set-top box, and the TV source Move Enter Return (broadcast or cable). You can change the required external source simply by pressing the VIDEO button on the remote control. It might take a short period of time for pictures to be switched. You can select a channel by entering the position number in this mode. N C (Real channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. N S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Channel - LNA This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise. TV Auto Store Manual Store Add/Delete Sort LNA Channel : Off On Move Enter Return N LNA (Low Noise Amplifier) setting is to be made for each channel. N If the picture is noisy with the LNA set to On, select Off. N Depending on areas, factory mode of LNA will be set up as On or Off. N From: Channel number to be changed. N To: New channel number to be identified. N Store: Confirmation the exchange of channel numbers. Move Adjust Return English - 4 Setup - Time Time TV Clock - - : - - am Clock You can set the television Sleep Timer : Off - - : - - am Off clock so that the current time On Timer Off Timer - - : - - am Off is displayed when pressing On Timer Volume : 10 the INFO button on the remote control. You must Move Enter Return also set the time if you wish to use the automatic on or off timers. When pressing the button (On/Off) on the front (or side) of the television, the clock setting will be reset. Setup - Child Lock Child Lock TV This feature allows you to Child Lock : On prevent unauthorized users, Programme :P1 such as children, from watching Lock :?unsuitable programmes by muting out video and audio. [. . . ] Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the color settings. Check that the broadcast system selected is correct. [. . . ]