User manual SAMSUNG CS-25M20SPQ

[. . . ] Connecting Headphones The (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. OE ´ ¨ ^ Ø On-screen menu display Volume adjustment Channel selection Remote control sensor Indicator Power on/off Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the OE (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. [. . . ] If any language is not OK selected, the language Enter Skip menu will disappear about 30 seconds later. Make sure that the antenna is connected to the television (refer to page 1). To search the channels, press the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed. Press the oe or button to move to the hour or minute. Set the hour or minute by pressing the . . . or button. Plug & Play Area Asia/W. Europe CIS/E. Europe China Hong Kong/UK Australia NZL/Indonesia Move Enter Plug & Play Auto Store South Africa America Re-setting the Plug & Play Method: MENU . . . / (Setup) ENTER . . . / (Plug & Play) ENTER TV Setup Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration Move Enter Return 3 Skip 4 5 5 Start Enter Plug & Play Auto Store P 1 C-102MHz 7% Stop Enter Skip Plug & Play Clock Set Move Adjust --:-Enter Skip Skip Input (depending on the model) Source List / Edit Name Source List TV Source List TV You can switch between AV1 ---viewing signal from AV2 ---Componet - - - connected equipment, such as a VCR, DVD, set-top box, and the TV source Move Enter Return (broadcast or cable). You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control. Setup - Plug & Play When the television is initially powered on, several basic customer settings proceed automatically and subsequently. MENU : You can memorise adjusted picture or sound. Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. TV From To Store : P 1 ----: P-- ----:?Sort If there is no sound or abnormal sound, re-select the sound standard required. Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Real channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. 0 From: Channel number to be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Move Adjust Return English - 4 Channel - Name Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. TV . . . More P 1 : ----P 2 : ----P 3 : ----P 4 : ----P 5 : ---- More Move Enter Return Name On Timer Channel The preferred channel can be set for when the timer automatically turns on the television. [. . . ] Check the picture contrast and brightness settings. Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the colour settings. [. . . ]