User manual SAMSUNG CS-29M20SPQ

[. . . ] Connecting Headphones The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. 1 2 3 4 5 6 On-screen menu display Volume adjustment Channel selection Remote control sensor Indicator Power on/off Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the 1 (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. [. . . ] Set the hour or minute by pressing the . . . or button. Plug & Play Area Asia/W. Europe CIS/E. Europe China Hong Kong/UK Australia NZL/Indonesia Move Enter Plug & Play Auto Store South Africa America Re-setting the Plug & Play Method: MENU . . . / (Setup) ENTER . . . / (Plug & Play) ENTER TV Setup Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration Move Enter Return 3 Skip 4 5 5 Start Enter Plug & Play Auto Store P 1 C-102MHz 7% Stop Enter Skip Plug & Play Clock Set Move Adjust --:-Enter Skip am Skip Input (depending on the model) Source List / Edit Name Source List TV Source List TV You can switch between AV1 ---viewing signal from AV2 ---Componet - - - connected equipment, such as a VCR, DVD, set-top box, and the TV source Move Enter Return (broadcast or cable). You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control. Setup - Plug & Play When the television is initially powered on, several basic customer settings proceed automatically and subsequently. 1 Plug & Play If the television is in standby Start Plug & Play mode, press the POWER OK button on the remote Enter Return control. The Start Plug & Play Plug & Play is displayed. To start Plug & Language Play, press the ENTER English button. The Language Français Türkçe menu is displayed. The Language menu will automatically Move Enter Skip appear after several seconds, even if the ENTER button is not pressed. 6 7 When you have finished, Enjoy your watching. is displayed, and then the channel which has been stored will be activated. Edit Name You can give a name to the external source. TV Edit Name ---AV1 : ---VCR AV2 : ---DVD Component : - - - Cable STB Sat. STB AV Receiver DVD Receiver Move Enter Return continued. . . English - 3 Channel - Auto Store You can scan for the frequency ranges available to you (and availability depends on your country). S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. 0 From: Channel number to be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Move Adjust Return English - 4 Channel - Name Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. TV . . . More P 1 : ----P 2 : ----P 3 : ----P 4 : ----P 5 : ---- More Move Enter Return Name On Timer Channel The preferred channel can be set for when the timer automatically turns on the television. On Timer Volume The preferred volume can be set for when the timer automatically turns on the television. Setup Language / Blue Screen / Melody / Demonstration Language It is variable depending on the model. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. TV Setup Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration Move Enter Exit Method: . . . / : Used to select a letter or number. oe/ : Used to move to the previous or next letter. ENTER : Used to confirm the new name. Auto Power Off When you set the timer "On", the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating or leakages, which may occur if a TV is on for too long (when you are on vacation, for example). Setup - Time Time TV Clock - - : - - am Clock You can set the television Sleep Timer : Off clock so that the current time On Timer - - : - - am Off Off Timer - - : - - am Off is displayed when pressing On Timer Channel : P 1 On Timer Volume : 10 the INFO button on the remote control. You must Move Enter Return also set the time if you wish to use the automatic on or off timers. [. . . ] If you press it in the LIST mode, it switches into the List save mode. In the List save mode, you can save teletext page into list using the (store) button. (reveal) Used to display the hidden text (answers to quiz games, for example). To display normal screen, press it again. [. . . ]