User manual SAMSUNG CS-29M30SSQ

[. . . ] Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the 1 (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when turning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Output The SCART2 and SCART3 connectors are used for equipment, such as a recording VCR or audio system. [. . . ] To exit without sorting, press the EXIT button. Stop Return Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. English - 3 TV From To Store :P1 : P-:?Sort 2 Select the appropriated language by pressing the or button. If any language is not OK selected, the language Enter Skip menu will disappear about 30 seconds later. continued. . . Move Adjust Return From: Channel number to be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Colour System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Channel :C4 choose: Store :?- Whether or not to store each of the channels found Move Adjust Return - The programme number of each stored channel which you wish to identify. Programme (Programme number to be assigned to a channel) Colour System: AUTO/PAl/SECAM/NTSC4. 43/ NTSC3. 58 Sound System: BG/DK/I/M Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. / ENTER : Set option of YES/ON to activate/deactive the operation. Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. Channel - Add/Delete You can exclude channels you have chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you did not specifically choose to skip are displayed during scanning. TV P P P P P Move More 1 : Added 2 : Added 3 : Added 4 : Added 5 : Added More Enter Add/Delete Channel - lNA When a weak broadcast signal causes an unclear, noisy picture, the "LNA" feature improves the picture quality by setting to " On". When you start Time Child Lock using the television for the Blue Screen : On first time, you must select Melody : On Music Mode : Off the language which will be used for displaying menus Move Enter Exit and indications. Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. Melody You can hear melody sound when the television is powered on or off. Music Mode You can listen to the music/audio with no video or visual distraction. When Music Mode is selected, only music is audible and no picture is visible. [. . . ] To display normal screen, press it again. (page up) 2 Used to display the next teletext page. (page down) 1 Used to display the previous teletext page. (cancel) Used to display the broadcast when searching for a page. [. . . ]