User manual SAMSUNG CS-29Z45M5

[. . . ] Register your product at www. samsung. com/global/register. __________ or cable television network 1 1 2 2 3 Control Panel (depending on the model) The product colour and shape may vary depending on the model. Front (or Side) Panel or cable television network 1 2 1 Audio input 2 Video input 3 Headphone jack 1 2 3 4 5 6 On-screen menu display Volume adjustment Channel selection Remote control sensor Standby indicator Power on/off Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the colour coded input terminals and cable jacks. [. . . ] Press the MENU button to return to the previous menu. Press the EXIT button to exit from the menu. 5 4 3 To search the channels, press the ENTER button. To stop the search, press the ENTER button. When the channel searching has finished, the Clock Set menu is displayed. Press the or button to move to the hour or minute. Set the hour or minute by pressing the or button. When you have finished, press the MENU button. is displayed, and then the channel which has been stored will be activated. Auto Store Plug & Play Input - Source List Source List TV You can switch between viewing TV signal from connected equipment, AV such as a VCR, DVD, set-top box, Component and the TV source (broadcast or cable). You can change the required Move Enter Return external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. You must set the clock first. Auto Power Off Channel - Manual Store You can store channels, including those received via cable networks. When storing channels manually, you can choose: ­ Whether or not to store each of the channels found ­ The programme number of each stored channel which you wish to identify TV Programme : Colour System : Sound System : Search : Store : Move Manual Store P3 AUTO BG 46MHz ? Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Fine Tune P1 Reset 0 When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. Move Adjust Save Return Adjust Return Programme (Programme number to be assigned to a channel) Colour System : AUTO / PAL / SECAM / NTSC4. 43 / NTSC3. 58 Sound System : BG / DK / I / M Search (When you do not know the channel numbers) The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Method: / : You can obtain a sharp and clear picture and good sound quality. MENU : You can memorise adjusted picture or sound. Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. You can select these options simply by pressing the SLEEP button on the remote control. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed. If there is no sound or abnormal sound, re-select the sound standard required. English - 4 Setup - Child Lock Child Lock This feature allows you to prevent TV Child Lock : On unauthorized users, such as Programme :P1 children, from watching unsuitable Lock :?programmes by muting out video and audio. [. . . ] (store) Used to store the teletext pages. Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the " I " button (On/Off) and the POWER button. [. . . ]