User manual SAMSUNG CS-29Z50HKQ OPEN SOURCE GUIDE (VER.1.1)

[. . . ] Register your product at www. samsung. com/global/register. Record your Model and Serial number here for future reference. __________ 1 5 2 1 S-Video input Control Panel (depending on the model) The product colour and shape may vary depending on the model. Front (or Side) Panel 1 2 3 4 or 2 Video input cable television network 3 Audio input Whenever you connect an audio or video system to your television, ensure that all elements are switched off. [. . . ] OK Plug & Play Move Enter Return Channel - Auto Store Setup Plug & Play Language : English Time Blue Screen : On Melody : On Move Enter Re-setting the Plug & Play Method: MENU / (Setup) ENTER / (Plug & Play) ENTER You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. TV Auto Store Channels are sorted and stored in the order which reflects their Area : Asia/W. Europe Search position in the frequency range (with lowest first and highest last). The programme originally selected is then displayed. Move Enter Return To stop the search before it Search has finished, press the ENTER P 1 C-87 MHz button. 10% When finished, the Sort menu Stop is displayed. To sort the stored Enter Return channels into the desired numerical order, refer to "Channel - Sort" on page 4. To exit without sorting, press the EXIT button. Return 2 Select the appropriated Plug & Play language by pressing the Check antenna input. If any language is not selected, the language menu will disappear about 30 seconds later. continued. . . English - 3 Channel - Manual Store You can store channels, including T V Manual Store those received via cable networks. Programme :P 1 When storing channels manually, Colour System :Auto Sound System :B/G you can choose: Channel :C-­ Whether or not to store each of Search : 40 MHz Store :?the channels found ­ The programme number of each Move Adjust Return stored channel which you wish to identify Programme (Programme number to be assigned to a channel) Colour System: Auto / PAL / SECAM / NTSC4. 43 / NTSC3. 58 Sound System: B/G / D/K / I / M Channel (When you know the number of the channel to be stored) You can also select the channel number directly by pressing the numeric buttons (0~9). You must also Move Enter Return set the time if you wish to use the automatic on or off timers. Film Mode You can automatically sense and process film signals from some sources and adjust the picture for optimum quality. Not available in the Component or HDMI mode. Mode discrepancies, such as turning off Film Mode while viewing a film source or turning on Film Mode while viewing Non-film sources, may affect the picture quality. On Timer / Off Timer You can set the On/Off timers so that the television will switch on or off automatically at the time you select. You must set the clock first. Picture - Mode Mode Mode : Dynamic / Standard / T V Movie / Custom Mode : Dynamic Contrast : 90 You can select the type Brightness : 50 of picture which best Sharpness : 50 Colour : 50 corresponds to your viewing requirements. More You can select these Move Enter Return options simply by pressing the P. MODE button on the remote control. Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. Contrast / Brightness / Sharpness / Colour / Tint (NTSC only) The television has several settings which allow you to control the picture quality. Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2 Reset You can return to the factory defaults. The reset function is set for each mode (Dynamic, Standard, Movie, or Custom). English - 5 Picture - PIP (depending on the model) You can display a sub picture within the main picture of TV programme or external A/V devices such as VCR or DVD. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. TV Sound - Mode / Equalizer / SRS TSXT / Auto Volume / Turbo Sound / Pseudo Stereo TV Mode: Standard / Music / Movie / Speech / Custom Mode : Custom Equalizer You can select the type of SRS TSXT : Off special sound effect to be Auto Volume : Off Turbo Sound : Off used when watching a given Pseudo Stereo : Off broadcast. Move Enter Return You can select these options simply by pressing the S. MODE button on the remote control. [. . . ] Press one of them corresponding to the required. The page is displayed with other coloured 1 information that can be selected in the same way. To display the previous or next page, press the corresponding coloured button. Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. 2 No sound or picture Check that the mains lead has been connected to a wall socket. [. . . ]