User manual SAMSUNG CS-29Z50HN

[. . . ] COLOR TELEVISION CS29Z40/29Z45/29Z50 WS32Z40 Connection Panel (depending on the model) The product colour and shape may vary depending on the model. Rear Panel Connecting to the HDMI Input The HDMI5 connector is used for equipment with HDMI output, such as a Set-Top Box, DVD player, AV receiver or digital TV. No additional Audio connection is needed for an HDMI to HDMI connection. Side Panel Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. [. . . ] Search (When you do not know the channel numbers) The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Channel - Channel Manager Channel Manager You can exclude the channels you have P1 C4 1/15 chosen from the channels you scanned. 1 C4 When you scan through the stored 2 C-3 S1 channels, those you have chosen to skip 4 S3 5 S6 are not displayed. 6 S8 7 S10 Add All of the channels that you do not Move Enter Page Return specifically choose to skip are displayed during scanning. It can be displayed simply by pressing the CH MGR (Channel Manager) button. Channel - Name Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. TV Name Prog. C21 C23 C25 C26 C28 Adjust Name ----------------Return Method: / : Used to select a channel to be added or erased. ENTER : Used to confirm the channel selected for adding or erasing. Method: / : Used to select a letter or number. / : Used to move to the previous or next letter. ENTER : Used to confirm the new name. Channel - Fine Tune Fine Tune If the reception is clear, you do not P2 * have to fine-tune the channel, as Reset this is done automatically during Move the search and store operation. Adjust Return If however the signal is weak or distorted, you may have to fine-tune the channel manually. When you start using the television for the first time, you must select the language which will be used for displaying menus and indications. TV Picture Size / Digital NR / DNIe/ Tilt / Film Mode Setup Picture TV Size: (depending on the model) Mode : Dynamic Size : 16:9 Nomal / Zoom1 / Zoom2 Digital NR : On 16:9 / Zoom1 / Zoom2 / 4:3 DNIe : Off Tilt :0 (Wide model) You can select the picture size More Move Enter Return which best corresponds to your viewing requirements. You can change the picture size simply by pressing the P. SIZE button on the remote control. Plug & Play Language : English Time Blue Screen : On Melody : On Move Adjust Return Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 2 You can select these options simply by1 pressing the SLEEP button on the remote control. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed. Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. Melody You can hear melody sound when the television is powered on or off. Digital NR If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. DNIe (depending on the model) This feature bring you more detailed image with detail enhancement, contrast enhancement and white enhancement. New image compensation algorithm gives brighter, clearer, much detailed image to you. DNIe Jr technology will fit every signals into your eyes. Tilt (depending on the model) If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting (-7 to +7). [. . . ] Check that you have pressed the " " button (On/Off) and the POWER button. Check the picture contrast and brightness settings. Check the volume. 3 4 Normal picture but no sound 2 Check the volume. 1 Check whether the volume MUTE button on the remote control has been pressed. 5 6 No picture or black and white picture Adjust the colour settings. [. . . ]