User manual SAMSUNG CS-29Z50ML

[. . . ] COLOR TELEVISION Owner's Instructions Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Rear Panel Connecting to the RCA Input The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector. ) The RCA5 connectors are used for equipment such as a DVD with component output. Front (or Side) Panel CS29Z45 / CS29Z47 / CS29Z50 / CS29Z57 CS29Z58 / CS29A730 / CS29A760 / CS29A750 / CS29B850 / CS29U50 / CS29U57 Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register or cable television network 1 Video input Control Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel OUT IN 2 IN 1 VIDEO Y PB PR 2 Audio input or cable television network Please be sure to match the color coded input terminals and cable jacks. Connecting to the RCA Input The 2 (AUDIO-L/R) and 1 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device. [. . . ] To return to the TV mode, press the SOURCE button on the remote control. Adjust From: Channel number to Move Return be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Move Enter Skip 2 Select the appropriated Plug & Play language by pressing the Check antenna input. If any language is not selected, the language menu will disappear about 30 seconds later. continued. . . English - 3 Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Color System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Store :?choose: - Whether or not to store each Adjust Move Return of the channels found. - The programme number of each stored channel which you wish to identify. Channel - Add/Delete You can exclude channels you have chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you did not specifically choose to skip are displayed during scanning. TV P 1 : Added P 2 : Added P 3 : Added P 4 : Added P 5 : Added More Move Enter More Setup - Time Add/Delete Time TV Clock Clock 12:00 am You can set the television On Timer - - : - - a m Off clock so that the current time Off Timer - - : - - a m Off is displayed when pressing the INFO button on the remote control. You must Move Enter Return also set the time if you wish to use the automatic on or off timers. When pressing the " P " button (On/Off) on the front (or side) of the television, the clock setting will be reset. Return Programme (Programme number to be assigned to a channel) Color System: AUTO/PAL/SECAM/NTSC4. 43/ NTSC3. 58 Sound System: BG/DK/I/M Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. You can also select the channel number directly by pressing the numeric buttons (0-9). Store (When you store the channel and associated programme number) If there is no sound or abnormal sound, re-select the sound standard required. Method: ENTER : Select Added or Deleted. On Timer / Off Timer You can set the On/Off timers so that the television will switch on or off automatically at the time you select. Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Method: Fine Tune /: You can obtain a sharp P1 0 and clear picture and good sound quality. Reset / ENTER : You can reset Move Save Adjust Return the setting. ENTER : You can memorise adjusted picture or sound. You must set the clock first. Auto Power Off timer "On", the TV will eventually turn When you set the off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. English - 4 Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. You can select these options simply by pressing the TOOLS button on the remote control to enter Sleep Timer. [. . . ] Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the color settings. Check that the broadcast system selected is correct. Sound and picture interference Try to identify the electrical appliance that is affecting the television, then move it further away. [. . . ]