User manual SAMSUNG CS-29Z58HYQ

[. . . ] CS29Z47 CS29Z50 CS29Z57 CS29Z58 CS29A730 COLOR TELEVISION Owner's Instructions COLOUR TELEVISION Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register. Record your Model and Serial number. Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel Rear Panel S-Video input or Video input cable television network Audio input Control Panel (depending on the model) The product colour and shape may vary depending on the model. Front (or Side) Panel Whenever you connect an audio or video system to your television, ensure that all elements are switched off. [. . . ] C (Real channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Channel - Channel Grouping You can choose your category and find your desired channel in a few seconds. You can save a channel under the following categories-Movie, Music, News, Sports, and User. / : Used to select the desired channel group. / ENTER : Used to confirm the new choice. TV Channel Grouping Group Select : News Set Channel Group Move TV Prog. 0 1 2 3 4 5 6 7 C-C05 C21 C04 C07 C10 C11 C13 Enter Return Set Channel Group MOVIE MUSIC NEWS SPORT USER Move Enter Return Channel - Manual Store TV Manual Store You can store channels, Programme :P 1 including those received via Colour System : Auto Sound System : OK cable networks. When storing Channel :C 5 channels manually, you can Search : 175 MHz Store :?choose: - Whether or not to store each of Move Return Enter the channels found - The programme number of each stored channel which you wish to identify Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Method: Fine Tune / : You can obtain a sharp P3 and clear picture and good sound quality. Reset / ENTER : You can reset Adjust Save the setting. MENU : You can memorise adjusted picture or sound. Channel - LNA When a weak broadcast signal TV Channel More causes an unclear, noisy picture, LNA : On the "LNA" feature improves Channel Grouping the picture quality by setting to "On". If you experience noise on a certain noise on a certain Return Move Enter channel, set the the "LNA" to "On" or "Off" for this channel, to obtain the optimum picture. Return Page Programme: Channel number to be locked. Lock: When press the ENTER button, the Locked is displayed. is locked, not access to the If any channelChild Lockyou canby using the control Channel and menu Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off. Melody You can hear melody sound when the television is powered on or off. Music Mode You can listen to the music/audio with no video or visual distraction. When Music Mode is selected, only music is audible and no picture is visible. buttons on the TV panel (the Not available is displayed in the Child Lock menu). You can access by using the remote control only. On Timer Volume Ther preferred volume can be set for when the timer automatically turns on the TV. Method: / : Move to the programme hour or minute. / : Used to set programme hour or minute. / ENTER : Set option of YES/ON to activate/deactive the operation. Method: ENTER : On/Off Auto Power Off When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. [. . . ] Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the colour settings. Check that the broadcast system selected is correct. Sound and picture interference Try to identify the electrical appliance that is affecting the television, then move it further away. [. . . ]