User manual SAMSUNG CS-34A11SP

[. . . ] COLOUR TELEVISION CS29A11SS/CS29A11SP/CS34A11SS CS34A11SP/WS32A11SS/WS32A11SP CS29M20SS/CS29M20SP/CS29Z4SS CS29Z4SP/CS29A6SP/CS29A7SP Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (OPTION) TELETEXT (OPTION) Contents CONNECTING AND PREPARING YOUR TELEVISION View of Your Television (depending on the model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infrared Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to an Aerial or Cable Television Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ) button. 3 4 5 6 Press the ENTER ( Press the or button to select LNA. To activate this feature, select On by pressing the oe or button. When you have finished, press the EXIT ( ) button to exit. Setting the LNA option to "On" may produce worse picture quality due to the current channel's signal condition. Hence, apply LNA On/Off selectively according to the picture quality that is currently displayed. English-22 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. TV Mode Custom Color Tone Size Digital NR More Move Picture oe Dynamic : Normal : Normal : On 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. oe Adjust Return 3 Press the ENTER ( Result: The Mode is selected. 4 Select the required picture effect by pressing the oe or button repeatedly. Result: The following picture effects are available: Dynamic - Standard - Movie - Custom. ) button to exit. 5 When you have finished, press the EXIT ( You can also set these options simply by pressing the P. MODE( ) (Picture Mode) button. English-23 Adjusting the Picture Settings Your television has several settings which allow you to control picture quality. TV Mode Custom Color Tone Size Digital NR More Move Picture : Dynamic : Normal : Normal : On 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Return Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. Enter 3 TV Contrast Brightness Sharpness Color oe : : : 90 50 60 50 Custom Press the ENTER ( 4 5 Press the or button to select Custom. Press the ENTER ( Result: ) button. The options available in the Custom group are displayed. Move oe Adjust Return 6 Press the or button to select the option (Contrast, Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the oe or button. ) button to exit. Contrast 90 7 When you have finished, press the EXIT ( If you make any changes to these settings, the picture standard is automatically switched to Custom. The television has an "automatic degaussing" system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the " " (On/Off) button on the front panel. (Refer to "Automatic Degaussing to Remove Color Patches" on page 48. ) English-24 Selecting the Color Tone 1 Press the MENU ( Result: ) button. TV Picture Mode Custom Color Tone Size Digital NR More Move : Dynamic oe Normal : Normal : On The main menu is displayed. 2 Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. 3 4 5 Press the ENTER ( oe Adjust Return Press the or button to select Color Tone. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the oe or button. ( Warm1 ~ Warm10 - Normal - Cool1 ~ Cool10 ). [. . . ] Repeat steps 2 and 3 for each page to be stored, using a different colored button each time. Press the (store) button until the corresponding blocks blink. English-43 Connecting to the External Input/Outputs Rear of the TV (depending on the model) VCR Decoder / Video game device Video disc player or Satellite receiver "MONITOR OUT (or 2 )" is used for the audio/video output of current television programme. This end can be fitted with: A SCART connector Three RCA connectors (Video + Audio-L and R) 2 )" so that you can redirect the signal 2 )". If you have a second VCR and wish to copy cassettes tape, connect the source VCR to "AV 2 INPUT 1)" and the target VCR to "MONITOR OUT (or (VCR) (or 1)" to "MONITOR OUT (or from "AV 2 INPUT (VCR) (or If you have a decoder, connect the decoder to the VCR and the VCR to the television. When you wish to record a programme, connect the receiver to "AV 2 INPUT (VCR) (or 1)" and the 2 )" so that you can redirect the signal from "AV 2 INPUT (VCR) VCR to "MONITOR OUT (or 1)" to "MONITOR OUT (or 2 )". (or Whenever you connect an audio or video system to your television, ensure that all elements are switched off. [. . . ]