User manual SAMSUNG CS-34Z6HF

[. . . ] COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. TELETEXT PICTURE IN PICTURE (OPTION) AV-LINK Safety Instructions ENG These illustrations represent precautions concerning your television. 10% 35¡ H 5¡ H 75% Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%). Do NOT expose the television to direct sunlight. Do NOT expose the television to any liquids. If the television is broken, do not try to repair it yourself. Contact qualified service personnel. During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Displaying any stationary images that exceed the long time, it can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash and arrow head within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. [. . . ] Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. Move the joystick up or down until the LNA option is selected. The LNA menu is displayed with the current option. Change a setting Confirm the option Return to normal viewing Then. . . Press the joystick button ( Press the TV button ( ). ). Move: 2 LNA 96 97 98 99 0 --------------------On 3 4 5 1 C 21 2 3 4 5 6 7 8 ----------------------------- Sel. : Store : Exit :TV Setting the Blue Screen Mode Function Language AV Setup Time Blue screen Plug & Play Off English If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue screen" mode to "Off". 1 2 Press the MENU button. Result: Move the joystick up or down until the Function is selected. The options available in the Function group are Result: displayed. Move the joystick up or down until the Blue screen option is selected. Change the option Return to normal viewing Then. . . Press the TV button ( ). Move: Sel. : 3 4 5 24 Selecting the Picture Size ENG You can select the picture format which best corresponds to your viewing requirements. The following picture formats are available (depending on the model): x Auto wide, Panorama, 16:9, 4:3, Zoom1, Zoom2 x Normal, 16:9, Zoom Adjust Scan mode Digital NR Tilt Size Custom Picture Natural scan Off 0 Normal 1 Press the MENU button. The options available in the Picture group are Result: displayed. Move the joystick up or down until the Size option is selected. The Size menu is displayed with the current option. Result: The picture is changed accordingly. Press the joystick button ( Press the TV button ( ). ). Move: Enter: 2 3 Size Normal Sel. : Store: 4 VGA Mode Size Adjust Confirm the option Return to normal viewing Store: Exit:TV If the PC is connected, you can adjust the VGA mode by moving the joystick up, down, left, or right. You can also select these options by simple pressing the P. SIZE button on the remote control. 25 Changing the Picture Standard ENG You can use your remote control to select the type of picture which best corresponds to your viewing requirements. [. . . ] Pin 1 2 3 4 5 6 7 8 9 10 11 Signal Audio output R Audio input R Audio output L Audio chassis return Video chassis return (RGB blue) Audio input L RGB blue input Switching voltage Video chassis return (RGB green) AV-Link (Ext 1) RGB green input Pin 12 13 14 15 16 17 18 19 20 21 Signal Video chassis return (RGB red) RGB red input Blanking signal (RGB switching) Video chassis return Blanking signal ground Video output Video input Screening/chassis return Pins 5, 7, 9, 11, 13, 15 and 16 are used for RGB processing and are only wired on the EXT1 or EXT3 connector. Wiring the Mains Power Supply Plug (UK Only) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. [. . . ]