User manual SAMSUNG CS-29A751JL

[. . . ] COLOUR TELEVISION CS29Z40/29Z45/29Z47/29Z50/29Z57/29Z58/ 29A730/29A750/29A760 Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Connecting to the RCA Output The RCA2 connectors are used for equipment, such as a recording VCR or audio system. Connecting to the RCA Input The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector. ) The RCA5 connectors are used for equipment such as a DVD with component output (480i only). Front (or Side) Panel Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. [. . . ] When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to "Channel - Sort". To exit without sorting, press the EXIT button. Search P1 102MHz 7% Stop Enter Return Move Enter Return 2 Select the appropriated Plug & Play language by pressing the . . . If any language is not selected, the language menu will disappear about 30 seconds later. continued. . . English - 3 Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. TV From To Store :P1 : P-:?Sort Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Colour System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Store :?choose: - Whether or not to store each Move Adjust Return of the channels found - The programme number of each stored channel which you wish to identify Channel - Add/Delete Add/Delete TV You can exclude channels you . . . More have chosen from the channels P 1 : Added you scanned. When you scan P 2 : Added P 3 : Added through the stored channels, P 4 : Added P 5 : Added those you have chosen to skip More are not displayed. All of the Move Enter Return channels that you did not specifically choose to skip are displayed during scanning. From: Channel number to be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Move Adjust Return Programme (Programme number to be assigned to a channel) Colour System: AUTO/PAL/SECAM/NTSC4. 43/NTSC3. 58 Sound System: BG/DK/I/M Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Method: ENTER, : Select Added or Deleted. If there is no sound or abnormal sound, re-select the sound standard required. Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Real channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Fine Tune Method: oe/ : You can obtain a sharp P1 and clear picture and good Reset sound quality. Move Save . . . / ENTER : You can reset Adjust Return the setting. MENU : You can memorise adjusted picture or sound. 0 English - 4 Setup - Time Time TV Clock Clock 10:00 am You can set the television On Timer --:-- am Off clock so that the current time Off Timer --:-- am Off is displayed when pressing the INFO button on the remote control. [. . . ] Normal picture but no sound Check the volume. Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture Adjust the colour settings. Check that the broadcast system selected is correct. [. . . ]