User manual SAMSUNG CT-29Z7P

[. . . ] CT29Z7P CT32Z7P CT34Z7P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COLOR TELEVISION IMPORTER Samsung Electronics Mexico S. A. 44, Col Nueva Industrial Vallejo Gustavo A. 07700, Mexico TEL) 52-5-747-5100 EXPORTER Samsung Electronics co. , Ltd. 416, Mae tan-3dong, Pal dal-Gu, Suwon City, Kyungki-Do Korea . . . . . . . . . . . . . Owner's Instructions AA68-02547A(ENG) Warning! [. . . ] Proceed to "Storing Channels in Memory" (next page). CHAPTER THREE: TV OPERATION 3. 5 O P E R AT I O N Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (ANT, STD, HRC, IRC). Press the MENU button to display the menu. Press the CH w button to select "Channel", then press the VOL + button. 2 Press the CH w button to select "Auto program". 3 Press the VOL + button. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the MENU button to exit. The TV automatically cycles through all of the available channels and stores them in memory. Press MENU at any time to interrupt the memorization process and return to the Channel menu. w 3. 6 CHAPTER THREE: TV OPERATION O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the MENU button to display the menu. Press the CH w button to select "Channel", then press the VOL+ button. 2 Press the CH v or CH w button to select "Add/Erase", then press the VOL+ button. 3 Press the VOL+ button. Press the CH v/w button or the number buttons to select the channel you want to add or erase. Press the MENU button. 4 Press the CH v or CH w button to select "Select". Press the VOL+ or VOLbutton to select "Added" or "Erased". Press the MENU button to exit. CHAPTER THREE: TV OPERATION 3. 7 O P E R AT I O N Changing Channels Using the Channel Buttons 1 Press the CH v or CH w button to change channels. When you press CH v or CH w, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels. ) You will not see channels that were either erased or not memorized. Directly Accessing Channels Use the number buttons to quickly tune to any channel. 1 Press the number buttons to go directly to a channel. For example, to select channel 27, press "2" then "7". The TV will change channels when you press the second number. When you use the number buttons, you can directly select channels that were either erased or not memorized. To select a channel over 100, press the +100 button. (For channel 122, press "+100" then "2" then "2". ) To change to single-digit channels (0­9) faster, press "0" before the single digit. (For channel "4" press "0" then "4". ) Using the PRE-CH Button to select the Previous Channel 1 Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them. w Adjusting the Volume Press VOL + or ­ VOL to increase or decrease the volume. Using Mute At any time, you can temporarily cut off the sound using the Mute button. 1 Press MUTE and the sound cuts off. [. . . ] (If not, contact your computer manufacturer or Samsung Dealer. ) First, click on "Settings" on the Windows start menu. While "Settings" is highlighted, move the cursor so that "control panel" is highlighted. When the control panel screen appears, click on "Display" and a display dialog-box will appear. Navigate to the "settings" tab on the display dialog-box. The two key variables that apply the TVPC interface are "resolution" and "colors. " The correct settings for these two variables are: * Size (sometimes called "resolution"): 640 x 480 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz. " Otherwise, just click "OK" and exit the dialog box. CHAPTER FIVE: PC DISPLAY 5. 2 P C D I S P L AY How to Change the Position of the Image 1 First, make sure that the remote control is the TV mode. [. . . ]