User manual SAMSUNG CT-21M7W

[. . . ] AA68-03173A_00(E)-FRONT COVER 10/24/03 9:38 AM Page 1 CT21S8W/CT21M7W/ CT25M6W/CT25K10MQ/ CT29V10MQ/CT29K10MQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COLOR TELEVISION . . . . . . . . . . . . . Owner's Instructions AA68-03173A-00 AA68-03173A_00(E)-Inside COVER 10/24/03 10:00 AM Page 2 Warning!Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] The on-screen display shows any or all of the following: Active channel, Audio source and the time. The on-screen displays disappear after about twelve seconds. When Closed Caption has been set, the icon( ) will appear by pressing the Display button. M 25 AA68-03173A_00(E)-CHAPTER 3 10/24/03 9:47 AM Page 26 O P E R AT I O N Selecting a Menu Language 1 Press the MENU button to display the menu. Press the M button three times to select "Function", then press the button. 2 Press the oe or button to select the appropriate language: English, Spanish or French. 3 Press the MENU button twice to exit. 26 AA68-03173A_00(E)-CHAPTER 3 10/24/03 9:47 AM Page 27 O P E R AT I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or a cable system). 1 Press MENU to display the menu. Press the M button two times to select "Channel", then press the button. 2 Repeatedly press the oe or button to cycle through these choices: ANT (antenna), STD, HRC or IRC (all cable TV). Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory" (next page). 3 Press the MENU button twice to exit. 27 AA68-03173A_00(E)-CHAPTER 3 10/24/03 9:47 AM Page 28 O P E R AT I O N Storing Channels in Memory (Automatic Method) 1 First, select the correct signal source (ANT, STD, HRC, IRC). Press the MENU button, then press the M button twice to select "Channel, " then press the button. 2 Press the M button to select "Auto program". 3 Press the oe or button. The TV will begin memorizing all of the available channels. The TV automatically cycles through all of the available channels and stores them in memory. Press the MENU button at any time to interrupt the memorization process and return to the Channel menu. M 4 After all the available channels are stored, the Auto program menu reappears. Press the MENU button twice to exit. 28 AA68-03173A_00(E)-CHAPTER 3 10/24/03 9:47 AM Page 29 O P E R AT I O N Adding and Erasing Channels (Manual Method) 1 Press the MENU button. Press the M button twice to select "Channel", then press the button. 2 Press the L or M button to select "Add/Erase". Press the button. 3 Press the oe / or number buttons to select the channel you want added or erased. 4 Press the L or M button to select "Select". Press the oe or button to select "Added" or "Erased". Press the MENU button three times to exit. 29 AA68-03173A_00(E)-CHAPTER 3 10/24/03 9:47 AM Page 30 O P E R AT I O N Changing Channels Using the Channel Buttons 1 Press the CH or CH button to change channels. When you press CH or CH , the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels. ) You will not see channels that were either erased or not memorized. Directly Accessing Channels Use the number buttons to quickly tune to any channel. 1 Press the number buttons to go directly to a channel. For example, to select channel 27, press "2", then "7". [. . . ] In text mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. M M 5 Depending on the particular broadcast, it might be necessary to make changes to "Channels" and "Field": Use the L, M, oe and buttons to make the changes. (Follow the same procedure as in steps 3~4 above. ) Press the MENU button three times to exit. Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish. ) 51 AA68-03173A_00(E)-CHAPTER 4 10/24/03 9:59 AM Page 52 S P E C I A L F E AT U R E S Viewing the Demonstration To become familiar with the various menus provided by your television, you can view the in built demonstration. 1 Press the MENU button to display the menu. [. . . ]