User manual SAMSUNG CT-V1901

[. . . ] TV/VCR Combination Unit Owner's Manual CTV1901 AA68-02959A-00 IMPORTANT SAFETY INSTRUCTIONS Warning!Important Safety Instructions Save These Instructions Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] There may be vertical jitter or horizontal streaks on the screen while a tape is paused. You can try to eliminate these problems by pressing the TRK + and TRK ­ buttons on the remote control. For information on automatic tracking, see page 25. To eject a video cassette tape: 1 Press STOP to stop playing the tape. When you're finished playing a video tape, rewind it and remove it from the TV/VCR to protect it from wear and tear. Then, if necessary, the TV/VCR will automatically adjust the tape's tracking. For information on automatic tracking, see page 25. For information on the time counter, see page 25. 2 2 Press STOP/EJECT on the TV/VCR to eject the tape. Remove the tape and turn off the TV/VCR. After five minutes in pause, the TV/VCR automatically enters PLAY mode to protect the video heads. Press PLAY to resume playing the tape. 24 CHAPTER FOUR: VCR OPERATION VCR OPERATION Playing a Video Tape, continued Using Picture Search Picture Search lets you quickly search a pre-recorded video tape for a particular scene. 1 While playing a tape, press and release FF or REW. The images from the tape are displayed on the screen at a high speed. This technique is useful if you are searching a small amount of tape. If you want to search a large amount of tape, stop the tape before pressing FF or REW. There is no sound while you search for a picture at high speeds, and some horizontal streaks may appear on the screen. 2 When you find the scene you want, press and release FF or REW again to resume playing the tape at regular speed. Using Tracking This feature automatically adjusts tracking on video tapes. 1 Insert and play a video tape. Using the Time Counter The time counter allows you to keep track of how much time (in hours, minutes, and seconds) has elapsed on the video tape. The counter can also be useful if you want to find a specific point on a pre-recorded tape. 1 While a tape is playing, press DISPLAY twice. 00:01:41 The TV/VCR automatically resets the counter to "00:00:00" when you eject a tape or record. 3 Press DISPLAY to remove the time counter. Using Memory Stop Memory Stop makes it easy to find a particular scene in a video tape. The TV/VCR automatically stops rewinding or fast forwarding when the memory counter reaches "00:00:00. " If you mark a desired scene as "00:00:00, " you can search for it the next time you watch the tape. 1 While playing a tape, when you reach the scene you want, press DISPLAY twice. 2 Press CLEAR to reset the timer to "00:00:00. " 2 When the tape begins to play, the TV/VCR begins automatic tracking. The tracking display will appear the first time a tape is played after being inserted into the TV/VCR, when there is a change in tape speed, or when you press TRK +, -. If automatic tracking doesn't remove the streaks from the picture, press and hold TRK+ or TRK­ until the streaks disappear. 2 The time counter appears. The counter displays time only for recorded sections of tape. Blank tapes or blank sections of tapes do not affect the counter display. Press CLEAR to set the counter to "00:00:00. " CHAPTER FOUR: VCR OPERATION 25 VCR OPERATION Playing a Video Tape, continued To return to the scene you marked: 1 Press STOP. [. . . ] This is normal for SP recordings. Identifying TV Problems Poor picture, no picture, blurred picture, or blue screen. Make sure the unit is plugged into a working wall outlet. · Make sure the program is broadcast in color. · If the set is moved or turned in a different direction, the power should be OFF for at least 30 minutes. [. . . ]