User manual SAMSUNG CW-29M026P

[. . . ] COLOUR TELEVISION Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (OPTION) TELETEXT Register your product at www. samsung. com/global/register Contents CONNECTING AND PREPARING YOUR TELEVISION View of Your Television (depending on the model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Infrared Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inserting the Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting to an Aerial or Cable Television Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the oe or button. 7 To store the fine tuning setting in the TV's memory, press the ENTER ( ) button. Result: Channel indicator turns into Red. 8 To erase adjusted picture or sound, select Reset by pressing the or button. Result: Channel indicator returns to its original colour. English - 19 Using the LNA (Low Noise Amplifier) Feature (depending on the model) TV . . . More Fine Tune LNA Channel oe On This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area; a low-noise preamplifier boosts the incoming signal. This feature is working only weak in signal condition, and this is memorized on the current channel, additionally. 1 Move oe Adjust Press the MENU ( Result: ) button. The main menu is displayed. Return 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. ) button. 3 4 5 Press the ENTER ( Press the or button to select LNA. To activate this feature, select On by pressing the oe or button. Setting the LNA option to "On" may produce worse picture quality due to the current channel's signal condition. Hence, apply LNA On/Off selectively according to the picture quality that is currently displayed. English - 20 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. TV Mode Size Digital NR Tilt oe : Picture Dynamic 16:9 : On :0 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. TV Mode Contrast Brightness Sharpness Colour More Move oe : : : : Move Enter Return 3 Press the ENTER ( Result: Mode Dynamic 90 50 50 50 The Mode is selected. 4 Select the required picture mode by pressing the oe or button repeatedly. Result: The following picture mode are available: Dynamic - Standard - Movie - Custom oe Adjust Return You can also set these options simply by pressing the P. MODE ( ; Picture Mode) button. English - 21 Customizing the Picture Settings Your television has several settings which allow you to control the picture quality. TV Mode Size Digital NR Tilt oe : Picture Dynamic 16:9 : On :0 1 Press the MENU ( Result: ) button. The main menu is displayed. 2 Move Enter Return Press the or button to select Picture. Result: The options available in the Picture group are displayed. ) button. TV Mode Contrast Brightness Sharpness Colour More Move oe : : : : Mode Standard 70 50 50 50 3 Press the ENTER ( Result: The Mode is selected. 4 Select the required picture mode by pressing the oe or button repeatedly. Result: The following picture mode are available: Dynamic - Standard - Movie - Custom oe Adjust Return 5 TV Mode Contrast Brightness Sharpness Colour More Move : oe : : : Mode Standard 70 50 50 50 Press the or button to select the option (Contrast, Brightness, Sharpness, Colour, or Tint-NTSC only) to be adjusted. These options are for each mode adjusted (Dynamic, Standard, Movie, or Custom). Result: The horizontal bar is displayed. Press the oe or button until you reach the optimal setting. ) button. 6 Press the MENU ( Result: oe Adjust Return The available options are displayed again. 7 Contrast 70 Press the or button to select Colour Tone. Select the required option by pressing the oe or button repeatdly. [. . . ] Enter the new page number using the numeric buttons. Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time. Press the (store) button until the corresponding blocks blink. English - 41 Connecting to the External Input/Outputs (depending on the model) "EXT 1 (RGB)" is used for the equipment with an RGB output, such as video game devices or video disc players. VCR or Decoder / Video game device DVD Rear of the TV Video disc player This end can be fitted with: A SCART connector Three RCA connectors (Video + Audio-L and R) source VCR to "EXT 1 (RGB)" and the target VCR to "EXT 2 (AV)" so that you can redirect the signal from "EXT 1 (RGB)" to "EXT 2 (AV)". television. Satellite receiver If you have a second VCR and wish to copy cassettes tape, connect the If you have a decoder, connect the decoder to the VCR and the VCR to the When you wish to record a programme, connect the receiver to "EXT 1 (RGB)" and the VCR to "EXT 2 (AV)" so that you can redirect the signal from "EXT 1 (RGB)" to "EXT 2 (AV)". English - 42 Connecting to the RCA Input (depending on the model) The RCA (VIDEO and AUDIO-L+R) connectors are used for equipment, such as camcorders, video disc players, and some video game devices. Camcorder Side of the TV Video game device Video disc player Connecting to the S-Video Input (depending on the model) The S-VIDEO IN and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV Camcorder and VCR To play pictures and sound, both the S-VIDEO IN and RCA connectors must be used. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. [. . . ]