User manual SAMSUNG CW-29M164N

[. . . ] COLOUR TELEVISION Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register Connection Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. Front (or Side) Panel Rear Panel Headphone jack or cable television network or Audio input Video input Control Panel (depending on the model) The actual configuration of your TV may be different, depending on your model. S-Video input Front (or Side) Panel Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Please be sure to match the colour coded input terminals and cable jacks. OE ´ ¨ ^ Ø On-screen menu display Volume adjustment Channel selection Remote control sensor Indicator Power on/off Connecting to an Aerial or Cable Television Network Connect the aerial or network input cable to the OE (75 coaxial socket). To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network. [. . . ] Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. Auto Store Channels are sorted and stored TV Belgie Country : Belgie in the order which reflects their Deutschland Search España position in the frequency range France (with lowest first and highest Italia Nederland last). The programme originally Schweiz selected is then displayed. Move Enter Return To stop the search before it has finished, press the Search P 1 C-- ----102MHz ENTER button. 7% When finished, the Sort menu Stop is displayed. To sort the stored Enter Return channels into the desired numerical order, refer to "Channel - Sort". To exit without sorting, press the EXIT button. Channel - Manual Store Manual Store TV You can store channels, Programme :P3 including those received via Colour System : AUTO cable networks. When storing Sound System : BG Search : 46MHz channels manually, you can Channel :C1 Store :?choose: - Whether or not to store each Move Adjust Return of the channels found - The programme number of each stored channel which you wish to identify Channel - Add/Delete Add/Delete TV You can exclude channels you . . . More have chosen from the channels P 1 : Added you scanned. When you scan P 2 : Added P 3 : Added through the stored channels, P 4 : Added P 5 : Added those you have chosen to skip More are not displayed. All of the Move Enter Return channels that you did not specifically choose to skip are displayed during scanning. Programme (Programme number to be assigned to a channel) Colour System: AUTO/PAL/SECAM/NTSC4. 43 Sound System: BG/DK/I/L Search (When you do not know the channel numbers): The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Channel (When you know the number of the channel to be stored) You can also select the channel number directly by pressing the numeric buttons (0~9). Store (When you store the channel and associated programme number) Method: ENTER . . . / ENTER : Select Added or Deleted. Channel - Sort This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using auto store. TV From To Store : P 1 ----: P-- ----:?Sort If there is no sound or abnormal sound, re-select the sound standard required. Channel mode P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode. C (Real channel mode): You can select a channel by entering the assigned number for each air broadcasting station in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Channel - Fine Tune If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Fine Tune Method: oe/ : You can obtain a sharp P1 and clear picture and good Reset sound quality. Move . . . / ENTER : You can reset Adjust Return the setting. [. . . ] Clean the upper edge of the remote control (transmission window). Check that the "+" and "-" ends of the batteries are inserted correctly. Check that the batteries are drained. ^ Coloured buttons (red/green/yellow/blue) If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext page are colour-coded and can be selected by pressing the coloured buttons. Press one of them corresponding to the required. [. . . ]