User manual SAMSUNG CW-29Z418T

[. . . ] COLOR TELEVISION Owner's Instructions Before operating, please read this manual thoroughly, and retain it for future reference. Register your product at www. samsung. com/global/register. Record your Model and Serial number here for future reference. __________ Connection Panel (depending on the model) The product colour and shape may vary depending on the model. [. . . ] Search (When you do not know the channel numbers) The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen. Store (When you store the channel and associated programme number) Channel - Channel Manager Channel Manager You can exclude the channels you have P1 C4 1/15 chosen from the channels you scanned. 1 C4 When you scan through the stored 2 C-3 S1 channels, those you have chosen to skip 4 S3 5 S6 are not displayed. 6 S8 7 S10 Add All of the channels that you do not Move Enter Page Return specifically choose to skip are displayed during scanning. It can be displayed simply by pressing the CH MGR (Channel Manager) button. Channel - Fine Tune Fine Tune If the reception is clear, you do not P2 * have to fine-tune the channel, as Reset this is done automatically during Move the search and store operation. Adjust Return If however the signal is weak or distorted, you may have to fine-tune the channel manually. +2 Method: / : Used to select a channel to be added or erased. ENTER : Used to confirm the channel selected for adding or erasing. Method: /: You can obtain a sharp and clear picture and good sound quality. MENU : You can memorise adjusted picture or sound. Channel - Sort This operation allows you to change the programme numbers of stored channels. You can select these options simply by pressing the SLEEP button on the remote control. If the sleep timer is not yet set, Off is displayed. If it is already set, the remaining time before which the television switches to standby mode is displayed. Mode Mode : Dynamic / Standard / T V Movie / Custom Mode : Dynamic Contrast : 90 You can select the type Brightness : 50 of picture which best Sharpness : 50 Colour : 50 corresponds to your viewing requirements. More You can select these Move Enter Return options simply by pressing the P. MODE button on the remote control. Contrast / Brightness / Sharpness / Colour / Tint (NTSC only) The television has several settings which allow you to control the picture quality. Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2 Reset You can return to the factory defaults. The reset function is set for each mode (Dynamic, Standard, Movie, or Custom). Film Mode You can automatically sense and process film signals from some sources and adjust the picture for optimum quality. Not available in the Component or HDMI mode. Mode discrepancies, such as turning off Film Mode while viewing a film source or turning on Film Mode while viewing Non-film sources, may affect the picture quality. On Timer / Off Timer You can set the On/Off timers so that the television will switch on or off automatically at the time you select. You must set the clock first. Auto Power Off Picture - PIP (depending on the model) You can display a sub picture within the main picture of TV programme or external A/V devices such as VCR or DVD. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. TV When you set the timer "On", the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer "On" mode and prevents overheating, which may occur if a TV is on for too long. Picture Mode : Size : Digital NR Tilt Film Mode PIP Dynamic 16:9 : On :0 : Off : Off TV PIP PIP Source Swap Size Position Prog. : On : TV : Large : :P1 Picture - Size / Digital NR/ Tilt / Film Mode Setup Language / Blue Screen / Melody Language It is variable depending on the model. [. . . ] Press it again to overlap the teletext with the current broadcasting screen. Colored buttons (red/green/yellow/blue) If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext page are colour-coded and can be selected by pressing the 2 coloured buttons. Press one of them corresponding to the required. The page is displayed with other coloured 1 information that can be selected in the same way. [. . . ]