User manual SAMSUNG CW-29M164NR OPEN SOURCE GUIDE (VER.1.1)

[. . . ] If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear. Connecting to the SCART Input/Output The SCART2 and SCART3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. The SCART2 is also used for equipment with an RGB output, such as a video game device or video disc player. Connecting Headphones The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing. When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority. You can use the 3 buttons to switch the TV on when it is in standby mode depending on the model. [. . . ] Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty. Setup - Plug & Play When the television is initially powered on, several basic customer settings proceed automatically and subsequently. 1 If the television is in standby Start Plug & Play mode, press the POWER OK button on the remote Enter Return control. The Start Plug & Play Plug & Play is displayed. To start Plug & Language Play, press the ENTER English Svenska Deutsch Português button. The Language Français ÏÏËÓÈο menu is displayed. Nederlands âetina Español Srpski The Language menu Italiano will automatically Move Enter Skip appear after several seconds, even if the ENTER button is not pressed. Plug & Play Plug & Play Select the appropriated Check antenna input. If any language is not selected, the language menu will disappear about 30 seconds later. continued. . . 7 When you have finished, Enjoy your viewing. is displayed, and then the channel which has been stored will be activated. TV Setup Plug & Play Language : English Time Child Lock Blue Screen : Off Melody : On Demonstration Move Enter Return Re-setting the Plug & Play Method: MENU . . . / (Setup) ENTER . . . / (Plug & Play) ENTER Input (depending on the model) Source List / Edit Name Source List TV Source List TV You can switch between EXT1 ---viewing signal from EXT2 ---connected equipment, such as a VCR, DVD, set-top box, and the TV source Move Enter Return (broadcast or cable). You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Fine Tune Method: oe/ : You can obtain a sharp P1 and clear picture and good Reset sound quality. Move . . . / ENTER : You can reset Adjust Return the setting. MENU : You can memorise adjusted picture or sound. 0 From: Channel number to be changed. To: New channel number to be identified. Store: Confirmation the exchange of channel numbers. Move Adjust Return English - 4 Channel - Name Channel names will be assigned automatically when channel information is broadcast. unsuitable programmes by muting out video and audio. Child Lock cannot be released Move Enter Return using front (or side) panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children. Demonstration To become familiar with the various menus provided by the television, you can view the in built demonstration. Each of the menu options is displayed in turn. To exit from the demonstration, press the EXIT button. Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. You can select these options simply by pressing the SLEEP button on the remote control. [. . . ] Remote control malfunctions Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check that the "+" and "-" ends of the batteries are inserted correctly. Check that the batteries are drained. 2 (index) Used to display the index (contents) page at any time while you are viewing teletext. [. . . ]