User manual SAMSUNG CXM1974 INTRODUCTION (VER.1.0)

[. . . ] TV/VCR Combination Unit Owner's Manual CXM1974 CXM1374 IMPORTANT SAFETY INSTRUCTIONS Warning!Important Safety Instructions Save These Instructions Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. [. . . ] You may set the on time, the off time, or both the on and the off time. Whatever you choose, you must turn the timer on after you set the on or off times. 2 Press CHw until "Time Set" is selected. Setting the on time 1 Press CHw to select "On Time. " 2 Press VOL+ to make the hour flash. Time Set Clock On Time Off Time Sleep 07:30pm 07:00pm Off 12:00pm Off Off 3 3 Press CHw until "Sleep" is selected. oeMove vwAdj. Menu Press CHv or CHw to set the hour the set will turn on. 5 Press CHv or CHw to set the minute the set will turn on. 7 Press CHv or CHw to set the timer to "ON. " Setting the off time 1 Press CHw to select "Off Time. " 2 Press VOL+ to make the hour flash. 3 Press CHv or CHw to set the hour the set will turn off. 5 Press CHv or CHw to set the minute the set will turn off. 6 Press VOL+ and CHv or CHw to set the timer "On". 7 Press MENU to exit the menu. 22 CHAPTER THREE: TV OPERATION CHAPTER FOUR VCR OPERATION Inserting and Ejecting a Video Tape To insert a video tape: 1 Hold the video tape windowside up, with the arrow pointing away from you. The TV/VCR loads the tape automatically. If the power is off when you insert a tape, the TV/VCR turns on automatically. If the safety tab of your video tape has been removed, the tape begins to play automatically. For more information on the safety tab, see page 35. Playing a Video Tape Playing a Tape 1 2 Pausing Insert the video tape. If the tape doesn't begin to play automatically, press PLAY. Play 1 2 Don't try to insert a tape upside down or backwards. Use only video tapes labeled "VHS. " PAL and S-VHS video tapes are not compatible with this unit. Choose brand name, high quality tapes for best results. Gently push the tape through the compartment door until you feel the VCR pull it in. While a tape is playing, press P. /STILL to pause the tape. There may be vertical jitter or horizontal streaks on the screen while a tape is paused. You can try to eliminate these problems by pressing the TRK + and TRK ­ buttons on the remote control. For information on automatic tracking, see page 24. To eject a video cassette tape: 1 Press STOP to stop playing the tape. When you're finished playing a video tape, rewind it and remove it from the TV/VCR to protect it from wear and tear. Then, if necessary, the TV/VCR will automatically adjust the tape's tracking. For information on automatic tracking, see page 24. For information on the time counter, see page 24. 2 2 Press STOP/EJECT on the TV/VCR to eject the tape. Remove the tape and turn off the TV/VCR. After five minutes in pause, the TV/VCR automatically enters PLAY mode protect the video heads. Press PLAY to resume playing the tape. CHAPTER FOUR: VCR OPERATION 23 VCR OPERATION Playing a Video Tape, continued Using Picture Search Picture Search lets you quickly search a pre-recorded video tape for a particular scene. [. . . ] Make sure the unit is plugged into a working wall outlet. · Make sure the program is broadcast in color. · If the set is moved or turned in a different direction, the power should be OFF for at least 30 minutes. · Check all wire connections. 34 CHAPTER SIX: TROUBLESHOOTING APPENDIX Caring for Your TV/VCR About Video Tapes Please follow these guidelines to get the maximum performance from your TV/VCR. Cabinet · Never open the cabinet or touch the parts inside. [. . . ]