User manual SAMSUNG CZ-15N112T OPEN SOURCE GUIDE (VER.1.1)

[. . . ] During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on or twist the power cord. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. [. . . ] To store the channel and associated programme number, select the Store and press the oe or button. Result: OK is displayed. 8 9 10 Repeat Steps 6 to 8 for each channel to be stored. When you have finished manual storage, press the EXIT ( ) button or press the MENU ( ) button repeatedly to return to normal viewing. 13 Skipping Unwanted Channels ENG Channel Auto Store Manual Store Add/Erase Fine Tune Sort You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. Select Enter Exit 1 2 Press the MENU ( ) button. Press the or button to select the Channel and press the oe or button. Press the or button to select the Add/Erase and press the oe or button. Result: The Add/Erase menu is displayed. Channel Add/Erase P1 P2 P3 P4 : Added : Added : Added : Added 3 4 Select Adjust Exit Press the or button to select the required channel. To add or erase the desired channel by pressing the oe or button. When you have finished adding and erasing channels, press the EXIT ( ) button or press the MENU ( ) button repeatedly to return to normal viewing 5 6 Channel Add/Erase P1 P2 P3 P4 : Erased : Added : Added : Added Select Adjust Exit 14 Fine tuning Channel Reception ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to finetune the channel manually. Channel Auto Store Manual Store Add/Erase Fine Tune Sort 1 2 3 Press the MENU ( ) button. Press the or button to select the Channel and press the oe or button. Press the or button to select the Fine Tune and press the oe or button. Result: When select the Mode to Custom, the Adjust menu is displayed. Result: You select the required option (Normal, Warm1/2, Cool1/2). Result: The horizontal bar is displayed. Picture Adjust Color Tone : Normal Contrast 90 Brightness 50 Sharpness 50 Color 50 Select Adjust Exit 4 To adjust the. . . Color Tone Picture Adjust Color Tone : Normal Contrast 90 Brightness 50 Sharpness 50 Color 50 Select Adjust Exit Contrast Brightness Sharpness Color Tint (NTSC only) 5 When you are satisfied with the settings, press the EXIT ( ) button or press the MENU ( ) button repeatedly to return to normal viewing. Contrast 91 The television has an "automatic degaussing" system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the " " (ON/OFF) button on the front panel (refer to "Automatic Degaussing to Remove Color Patches" on page 34). If you make any changes to the Adjust settings, the picture standard is automatically switched to Custom. 18 Changing the Sound Standard (depending on the model) ENG You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: Custom, Standard, Music, Movie, Speech. Sound oe Mode Custom Adjust Auto Volume : Off Melody : On Pseudo Stereo : Off Turbo Sound : Off 1 2 Press the MENU ( ) button. Press the or button to select the Sound and press the oe or button. Result: The Mode menu is selected. Select Adjust Exit 3 4 Select to satisfy your preference by pressing the oe or button. When you have been finished, press the EXIT ( ) button or press the MENU ( ) button repeatedly to return to normal viewing. You can select the required sound effect by simply pressing the "S. MODE" (Sound Mode) button on the remote control. 19 Adjusting the Sound Settings (depending on the model) ENG The sound settings can be adjusted to suit your personal preferences. Sound oe Mode Custom Adjust Auto Volume : Off Melody : On Pseudo Stereo : Off Turbo Sound : Off 1 2 3 Press the MENU ( ) button. Press the or button to select the Sound and press the oe or button. Press the or button to select the Adjust and press the oe or button. Result: When select the Mode to Custom, the Adjust menu is displayed. Select Enter Exit Sound Adjust Bass Treble Balance 50 50 L 50 R 50 4 5 Select the required option by pressing the or button and adjust to satisfy your preference by pressing the oe or button. [. . . ] Press the (store) button until the corresponding blocks are displayed in white. The button is used to switch between: LIST mode FLOF mode Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. 1 2 Check that all the necessary connections have been made. Switch the television on and if necessary, press the VIDEO ( button one or more times until the required input is displayed. ) Depending on the source selected, the pictures may appear automatically. To watch television programmes again, press the TV ( ) button and select the number of the channel required. 32 Connecting to the Audio/Video Input/Outputs The actual configuration on your TV may be different, depending on your model. ENG Rear of TV (depending on the model) AV cable (depending on the model) VCR VIDEO OUTPUT AUDIO INPUT Decoder/ Video game device VIDEO AUDIO MONITOR -OUT Video disc player INPUT Camcorder Satellite receiver (MONO) VIDEO L-AUDIO-R MONITOR -OUT INPUT The Audio/Video connector on the rear of the television is used for equipment with an RGB output. Front (or Side) of TV (depending on the model) AV cable (depending on the model) Camcorder Video disc player Decoder/ Video game device The Audio/Video connector on the front (or side) of the television is used for equipment, such as camcorders, video disc players and certain video games. When both the front (or side) and rear connectors are connected to external equipment, the front (or side) AV has the priority. 33 Automatic Degaussing to Remove Color Patches ENG A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually. [. . . ]